Case IH CX50 CX60 CX70 CX80 CX90 and CX100 Tractors Operator’s Manual Instant Download (Publication No.9-80462)

cx50 cx60 cx70 cx80 cx90 and cx100 tractors l.w
1 / 22
Embed
Share

Please open the website below to get the complete manualnn//


Uploaded on | 0 Views


Download Presentation

Please find below an Image/Link to download the presentation.

The content on the website is provided AS IS for your information and personal use only. It may not be sold, licensed, or shared on other websites without obtaining consent from the author. Download presentation by click this link. If you encounter any issues during the download, it is possible that the publisher has removed the file from their server.

E N D

Presentation Transcript


  1. CX50, CX60, CX70, CX80, CX90 and CX100 Tractors CX50, CX60, CX70, CX80 CX90 and CX100 Tractors Operators Manual Don 9-80462

  2. Alt+ to display template information Alt= to hide template information TRIM THIS EDGE CX50, CX60, CX70, CX80, CX90 and CX100 Tractors Template Date: 1994_05_26 Template Name: OM_1_col Don 9-80462 NOTE: This manual replaces Don 9-80461 TRIM THIS EDGE RIGHT PAGE

  3. THIS SAFETY ALERT SYMBOL INDICATES IMPORTANT SAFETY MESSAGES IN THIS MANUAL. WHEN YOU SEE THIS SYMBOL, CAREFULLY READ THE MESSAGE THAT FOLLOWS AND BE ALERT TO THE POSSIBILITY OF PERSONAL INJURY OR DEATH. ! Template Date: 1994_05_26 Template Name: OM_1_col M171B Safety Decals on this machine which use the words Danger, Warning or Caution, are defined as follows: G DANGER: Indicates an immediate hazardous situation which if not avoided, will result in death or serious injury. The color associated with Danger is RED. G WARNING: Indicates an potentially hazardous situation which if not avoided, will result in serious injury. The color associated with Warning is ORANGE. G CAUTION: Indicates an potentially hazardous situation which if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices. The color associated with Caution is YELLOW. Safety Decals on this machine which are ISO-two panel Pictorial type decals, are defined as follows: TRIM THIS EDGE G The first panel indicates the nature of the hazard. G The second panel indicates the appropriate avoidance of the hazard. G Background color is YELLOW. G Prohibition symbols such as and if used, are RED. STOP WA R N I N G IMPROPER OPERATION OF THIS MACHINE CAN CAUSE INJURY OR DEATH. BEFORE USING THIS MACHINE, MAKE CERTAIN THAT EVERY OPERATOR: G Is instructed in safe and proper use of the machine. G Reads and understands the Manual(s) pertaining to the machine. G Reads and understands ALL Safety Decals on the machine. G Clear the area of other persons. G Learns and practices safe use of machine controls in a safe, clear area before operating this machine on a job site. ! Alt+ to display template information Alt= to hide template information It is your responsibility to observe pertinent laws and regulations and follow Case Corporation instructions on machine operation and maintenance. Don 9-80462 1999 Case Corporation February 1998 (Revised December 1999) Case and IH are registered trade marks of Case Corporation TRIM THIS EDGE LEFT PAGE

  4. https://www.ebooklibonline.com Hello dear friend! Thank you very much for reading. Enter the link into your browser. The full manual is available for immediate download. https://www.ebooklibonline.com

  5. GENERAL TABLE OF CONTENTS TO THE OWNER .............................................................................................. 1 Alt+ to display template information IDENTIFICATION NUMBERS/MACHINE COMPONENTS ............................ 6 PRODUCT IDENTIFICATION AND SERIAL NUMBERS ................................ 6 MACHINE COMPONENTS .............................................................................. 8 Alt= to hide template information SAFETY/DECALS ............................................................................................ 9 INTENDED USE .............................................................................................. 9 GENERAL SAFETY AND ACCIDENT ........................................................... 10 PREVENTION REGULATIONS ..................................................................... 10 TRANSPORTING PASSENGERS ................................................................. 10 OPERATION .................................................................................................. 10 LEAVING THE TRACTOR ............................................................................. 11 IMPLEMENTS ................................................................................................ 11 PTO OPERATION ......................................................................................... 11 SERVICE ....................................................................................................... 12 BATTERY SAFETY ....................................................................................... 12 HAZARDOUS CHEMICALS .......................................................................... 13 BASIC RULE .................................................................................................. 13 SAFETY DECALS .......................................................................................... 14 ROLL OVER PROTECTIVE STRUCTURE (ROPS) ...................................... 18 TRIM THIS EDGE INSTRUMENTS/CONTROLS ......................................................................... 19 TRACTOR ACCESS ...................................................................................... 19 OPERATORS SEAT ...................................................................................... 20 STEERING COLUMN ADJUSTMENT ........................................................... 27 STANDARD (ANALOG) INSTRUMENT CLUSTER ....................................... 28 DELUXE (DIGITAL) INSTRUMENT CLUSTER ............................................. 29 OPERATING CONTROLS ............................................................................. 36 OPERATOR CAB ENVIRONMENT CONTROLS .......................................... 45 ADDITIONAL CAB FEATURES ..................................................................... 48 REAR VIEW MIRRORS ................................................................................. 51 Template Date: 1994_05_26 Template Name: OM_1_col I TRIM THIS EDGE RIGHT PAGE

  6. OPERATING INSTRUCTIONS ...................................................................... 52 BEFORE STARTING THE ENGINE .............................................................. 52 RUN IN PROCEDURE .................................................................................. 53 MASTER DISCONNECT SWITCH................................................................. 53 SERVICE INDICATOR LAMPS AND GAUGES ............................................ 54 NORMAL STARTING PROCEDURE ............................................................ 56 COLD TEMPERATURE OPERATION .......................................................... 58 PARKING THE TRACTOR AND STOPPING THE ENGINE ............................................................................. 63 OPERATING THE TRANSMISSION ............................................................. 65 CAB ENVIRONMENT .................................................................................... 71 FRONT LOADER CONTROL LEVER ........................................................... 78 DRAWBAR .................................................................................................... 80 HEIGHT ADJUSTABLE TRAILER HITCHES................................................. 85 AUTO HITCH ................................................................................................. 88 IMPLEMENT/TRAILER DRAWBAR DIMENSIONS ...................................... 94 TRAILER BRAKE COUPLINGS .................................................................... 96 AUXILIARY ELECTRICAL POWER SOCKETS ............................................ 98 TRACTOR WARNING LAMPS .................................................................... 100 TOWING THE TRACTOR ........................................................................... 102 HOW TO TRANSPORT THE TRACTOR .................................................... 103 FOLDABLE ROPS FRAME ......................................................................... 104 Template Date: 1994_05_26 Template Name: OM_1_col TRIM THIS EDGE FIELD OPERATION ..................................................................................... 106 CREEPER TRANSMISSION OPERATION.................................................. 106 WHEEL SLIP INDICATOR .......................................................................... 108 PROGRAMMING THE INSTRUMENT CLUSTER ...................................... 111 DISTANCE FUNCTION OPERATION ......................................................... 122 AREA FUNCTION OPERATION ................................................................. 124 REAR POWER TAKEOFF ........................................................................... 126 FRONT POWER TAKEOFF OPERATION .................................................. 133 REAR THREE POINT HITCH PREPARATION ........................................... 135 REAR THREE POINT HITCH OPERATION ............................................... 144 RIDE CONTROL .......................................................................................... 153 SLIP LIMIT CONTROL ................................................................................ 155 REAR THREE POINT HITCH DIAGNOSTIC DISPLAY .............................. 157 DIFFERENTIAL LOCK CONTROL .............................................................. 159 MECHANICAL FRONT DRIVE (MFD) OPERATION .................................. 160 FRONT HITCH PREPARATION .................................................................. 162 FRONT HITCH OPERATION ...................................................................... 164 REMOTE HYDRAULIC VALVES ................................................................. 165 REMOTE HYDRAULICS OPERATION ....................................................... 169 IMPLEMENT CABLE ACCESS ................................................................... 173 Alt+ to display template information Alt= to hide template information II TRIM THIS EDGE LEFT PAGE

  7. TIRES/WHEELS/SPACING/BALLAST ....................................................... 174 TIRE AND WHEEL EQUIPMENT ................................................................ 174 TIRE AND WHEEL SERVICE ...................................................................... 185 INSTRUMENT CLUSTER PROGRAMMING FOR DIFFERENT TIRE SIZES ............................................................... 186 FRONT AXLE AND FRONT TREAD ADJUSTMENTS ................................ 189 FRONT TO REAR TIRE SIZE COMBINATIONS ......................................... 200 FRONT WHEEL FENDERS ......................................................................... 203 REAR WHEEL TREAD ADJUSTMENT ....................................................... 204 TRACTOR BALLAST ................................................................................... 211 Alt+ to display template information Alt= to hide template information LUBRICATION/MAINTENANCE ................................................................. 223 ENVIRONMENT .......................................................................................... 223 PLASTIC AND RESIN PARTS .................................................................... 223 SERVICE PARTS ........................................................................................ 223 TOOL BOX ................................................................................................... 224 HOURMETER .............................................................................................. 225 SERVICE ACCESS ..................................................................................... 226 LUBRICANTS AND CAPACITIES ............................................................... 230 SERVICE CHART ........................................................................................ 232 10 HOURS OR DAILY ................................................................................. 234 50 HOUR INTERIM SERVICE ..................................................................... 238 100 HOUR INTERIM SERVICE ................................................................... 243 250 HOUR INTERIM SERVICE ................................................................... 249 500 HOUR INTERIM SERVICE ................................................................... 258 1000 HOUR MAIN SERVICE ....................................................................... 268 2000 HOUR MAIN SERVICE ....................................................................... 283 GENERAL MAINTENANCE ......................................................................... 289 TRIM THIS EDGE Template Date: 1994_05_26 Template Name: OM_1_col III TRIM THIS EDGE RIGHT PAGE

  8. ELECTRICAL SYSTEM ............................................................................... 292 BATTERY .................................................................................................... 292 BULB AND LAMP REPLACEMENT ............................................................ 297 FUSES ......................................................................................................... 306 RELAYS ....................................................................................................... 308 Template Date: 1994_05_26 Template Name: OM_1_col MACHINE STORAGE .................................................................................. 311 SPECIFICATIONS ........................................................................................ 313 DIESEL ENGINES ....................................................................................... 313 ELECTRICAL SYSTEM ............................................................................... 315 GENERAL MACHINE .................................................................................. 316 APPROXIMATE TRAVEL SPEEDS ............................................................ 319 APPROXIMATE DIMENSIONS ................................................................... 330 APPROXIMATE TRACTOR WEIGHTS ....................................................... 340 MAXIMUM PERMITTED OPERATING WEIGHTS ...................................... 341 NOISE LEVELS ........................................................................................... 342 DETAIL INDEX ............................................................................................. 343 TRIM THIS EDGE CASE TECHNICAL MANUALS ................................................................... 350 Alt+ to display template information Alt= to hide template information IV TRIM THIS EDGE LEFT PAGE

  9. TO THE OWNER CX100 DELUXE CAB TRACTOR With Mechanical Front Drive (MFD) Alt+ to display template information Alt= to hide template information TRIM THIS EDGE DP99J071 Dealer Stamp Template Date: 1994_04_29 Template Name: OM_1_col Manufacturer: CASE UNITED KINGDOM LIMITED Wheatley Hall Road Doncaster South Yorkshire DN2 4PG ENGLAND 1 TRIM THIS EDGE RIGHT PAGE

  10. TO THE OWNER DR99J059 Template Date: 1994_04_29 Template Name: OM_1_col CX90 2 Post and CX70 4 Post ROPS (Platform) TRIM THIS EDGE CX60 Low Profile Cab Tractor with 2WD, Alt+ to display template information Alt= to hide template information Tractors both with MFD 2 TRIM THIS EDGE LEFT PAGE

  11. TO THE OWNER How To Use This Manual Alt+ to display template information Read this manual before you start the engine or operate your tractor. If you need any more information, see your Case dealer. Alt= to hide template information This manual contains important information about the safe operation, adjustment and maintenance of your Case Tractor. To help you find information easily this manual has been separated into chapters, as shown in the General Table of Contents. The operation of the tractor has been separated into four main chapters: 1. INSTRUMENTS/CONTROLS - Showing the location and description of all controls. 2. OPERATING INSTRUCTIONS - General information for every day tractor operation, e.g. starting/stopping the tractor, operating the transmission etc. 3. FIELD OPERATION - Information for various operations specifically for use in the field, e.g. 3 point hitch, rear PTO etc. 4. TYRES/WHEELS/SPACING/BALLAST - Adjustments for various tractor operating applications, e.g. tyre pressures, tread widths etc. TRIM THIS EDGE The maintenance of the tractor has been separated into two main chapters: 1. LUBRICATION/MAINTENANCE - Service interval hours, and adjustments. 2. ELECTRICAL SYSTEM - General electrical service information. IMPORTANT: Refer to the Detail Index at the end of this manual for locating specific items about your machine. The right and left of the tractor in this manual are the same as your right and left when sitting in the tractor seat looking forward. Template Date: 1994_04_29 Template Name: OM_1_col DO NOT operate or permit anyone to operate or service this machine until you or the other persons have read this manual. Use only trained operators who have demonstrated the ability to operate and service this machine correctly and safely. This tractor, with standard equipment and authorized attachments, is intended to be used for farming, and related operations. DO NOT use this machine for any application or purpose other than those described in this manual. Consult an authorized dealer or the Case Corporation on changes, additions or modifications that can be required for this machine to comply with various country regulations and safety requirements. Unauthorized modifications will cause serious injury or death. Anyone making such unauthorized modifications is responsible for the consequences. 3 TRIM THIS EDGE RIGHT PAGE

  12. TO THE OWNER Manual Storage Keep the Operators Manual stored in the manual storage equipped on this machine. Template Date: 1994_04_29 Template Name: OM_1_col compartment Make sure this manual is complete and in good condition. Contact additional manuals or for any further information or assistance about your machine. your dealer to obtain Your dealer has technicians with special training that know the best methods of repair and maintenance for your tractor. DP96E064 TRIM THIS EDGE IMPORTANT: This operators manual is part of your tractor. If the tractor is sold, loaned or rented, the operators manual MUST go with it. Alt+ to display template information Alt= to hide template information 4 TRIM THIS EDGE LEFT PAGE

  13. TO THE OWNER Declaration of Conformity Alt+ to display template information This tractor complies with the provisions of directive (89/336/EEC): Alt= to hide template information - Electromagnetic Compatibility (EMC). EMC - Supplementary Information Safety information for the supplementary installation of electrical and electronic appliances and/or components. This tractor is equipped with electronic constituents and component parts whose function can be influenced by electromagnetic radiations of other appliances. Such influences can cause hazards for persons if the following safety information is not taken into account. 1. For supplementary installation of electrical and electronic appliances and/or constituents on the tractor with a connection to the onboard system, the user HAS to verify whether the installation causes disturbances to the electronics on the tractor or other constituents. This particually applies to: TRIM THIS EDGE A. Powershift Control B. Instrument Cluster Also it has to be taken into account that the supplementarily installed electrical and electronic components comply with the EMC Directive 89/336/EEC in the respective current version and that they are CE marked. 2. For the supplementary installation of mobile communication systems (ie. radio communication, mobile telephone) the following additional requirements have to be fulfilled: A. Only devices with an approval complying with the valid national regulations must be installed. B. The devices must be firmly installed. C.The operation of portable or mobile devices within the cab of the tractor is ONLY permitted if the device has a fixed outside antenna. D.The transmitting part shall be installed separately to the tractor electronics. E. Installation of the antenna must be carried out by a professional and the antenna must have a good ground connection between the antenna and the tractor ground. Template Date: 1994_04_29 Template Name: OM_1_col For the correct size cabling, installation and the maximum permissible current supply, the installation instructions of the tractor manufacturer have to be considered additionally. 5 TRIM THIS EDGE RIGHT PAGE

  14. IDENTIFICATION NUMBERS/MACHINE COMPONENTS PRODUCT IDENTIFICATION AND SERIAL NUMBERS Template Date: 1994_04_29 Template Name: OM_1_col Write your machine Model number, Product Identification Number (P.I.N.), and Serial numbers on the lines provided below. If needed, give these numbers to your Case dealer when you need parts or information for your machine. Keep the record and your Manufacturers Statement of Origin in a safe place. If the machine is stolen, report the numbers to your local police. 1. TRACTOR MODEL NUMBER___________________________________ 2. PRODUCT IDENTIFICATION NUMBER___________________________ 3. MFD AXLE SERIAL NUMBER __________________________________ 4. ENGINE SERIAL NUMBER ____________________________________ 5. TRANSMISSION SERIAL NUMBER______________________________ TRIM THIS EDGE 6. CAB/PLATFORM ROPS SERIAL NUMBER ________________________ P.I.N. Plate Details Alt+ to display template information Alt= to hide template information DI96M018 6 TRIM THIS EDGE LEFT PAGE

  15. IDENTIFICATION NUMBERS/MACHINE COMPONENTS Number Locations Alt+ to display template information 7 8 1 Alt= to hide template information 6 TRIM THIS EDGE 2 3 4 5 DR99J063 9 1. MODEL /P.I.N. NUMBER 2. P.I.N. NUMBER 3. MFD AXLE 4. ENGINE 5. TRANSMISSION 6. CAB OR 4 POST ROPS 7. MODEL/P.I.N. NUMBER 8. IDENTIFICATION DECAL 9. 2 POST FOLDABLE ROPS Template Date: 1994_04_29 Template Name: OM_1_col 1 DS98E265 ROPS (Platform) ONLY 7 TRIM THIS EDGE RIGHT PAGE

  16. IDENTIFICATION NUMBERS/MACHINE COMPONENTS MACHINE COMPONENTS Template Date: 1994_04_29 Template Name: OM_1_col 2 1 3 6 TRIM THIS EDGE 4 5 DP99J056 7 Alt+ to display template information Alt= to hide template information 8 9 11 10 DR99J084 1. FRONT WORK LAMPS 2. HEADLAMPS (IF EQUIPPED WITH FRONT HITCH) 3. FRONT PTO 4. FRONT HITCH 5. BATTERY BOX 6. TOOL BOX 7. EXTERNAL LINKAGE CONTROLS 8. TOP LINK 9. REAR PTO 10. DRAWBAR 11. FUEL FILLER CAP 8 TRIM THIS EDGE LEFT PAGE

  17. SAFETY/DECALS SAFETY ! ! Before operating, read and comply with the operators manual and safety instructions. Alt+ to display template information Alt= to hide template information Understand that your safety and the safety of other persons is measured by how you service, and operate this machine. Know the positions and operations of all controls before you try to operate. MAKE SURE YOU CHECK ALL CONTROLS IN A SAFE AREA BEFORE STARTING YOUR WORK. READ THIS MANUAL COMPLETELY and make sure you understand the controls. All equipment has a limit. Make sure you understand the speed, brakes, steering, stability, and load characteristics of this machine before you start to operate. The safety information given in this manual does not replace safety codes, insurance needs, federal, state and local laws. Make sure your machine has the correct equipment needed by the local laws and regulations. CASE is continuing to work for your safety: by making tractors with better protection and by giving these rules for safe operation. TRIM THIS EDGE THIS SAFETY ALERT SYMBOL INDICATES IMPORTANT SAFETY MESSAGES IN THIS MANUAL. WHEN YOU SEE THIS SYMBOL CAREFULLY READ THE MESSAGE THAT FOLLOWS AND BE ALERT TO THE POSSIBILITY OF PERSONAL INJURY OR DEATH. ! M171B INTENDED USE This Case tractor is designed solely for use in customary agricultural or similar operation (intended use). Use in any other way is considered as contrary to the intended use. The manufacturer accepts no liability for any damage or injury resulting from this misuse and these risks must be born solely by the user. Template Date: 1994_04_29 Template Name: OM_1_col Compliance with and strict adherence to the conditions of operation, service and repair as specified by the manufacturer also constitutes essential elements for the intended use. This Case tractor should be operated, serviced and repaired only by persons familiar with all its particular characteristics and acquainted with the relevant safety rules (accident prevention). The accident prevention regulations, all other generally recognized regulations on safety and occupational medicine and the road traffic regulations must be observed at all times. Any arbitrary modifications carried out on the tractor will relieve the manufacturer of all liability for any resulting damage or injury. 9 TRIM THIS EDGE RIGHT PAGE

  18. SAFETY/DECALS GENERAL SAFETY AND ACCIDENT PREVENTION REGULATIONS ! ! Template Date: 1994_04_29 Template Name: OM_1_col G In addition to the instructions contained in this operator s manual, also observe the general safety and accident prevention regulations. G Always comply with local traffic regulations when driving on public roads. G Before starting work, familiarize yourself with all the controls and instruments and their functions. During work is too late. G Start the engine only from the operator s seat. G Never attempt to start engine by shorting across the starting motor terminals as the machine may immediately start to move. G Before moving away, always check the immediate vicinity of the machine (e.g. for children). Ensure adequate visibility. G Never run the engine in a closed building. Proper ventilation is required. G Clothing worn by the operator must be close-fitting. Avoid wearing loose jackets, shirts or ties. G Handle fuel with care as it is highly flammable. Never refuel the machine in the vicinity of naked flames or sparks. Do not smoke during refuelling. G Always stop the engine and remove the main switch key before refuelling. Fill fuel tank outdoors. Clean up any spilled fuel immediately. G Prevent fires by keeping the machine clean. G Take care when handling battery acid (toxic and corrosive). G Exposure to high noise levels may cause hearing loss. Always wear suitable ear protection when working in a noisy environment. TRIM THIS EDGE Alt+ to display template information Alt= to hide template information TRANSPORTING PASSENGERS ! ! G Passengers may only be carried if a proper passenger seat is fitted. G The carrying of passengers is otherwise not permitted. OPERATION ! ! G DO NOT operate the machine while under the influence of drugs. G Always adapt your ground speed to the ground conditions. Avoid making sharp turns when driving up or down slopes or when driving across the slope. Do not attempt to turn the machine with the differential lock engaged. When driving down slopes, never depress the clutch and change gear. DO NOT operate up and down slopes of more than 30 degrees and DO NOT operate across slopes of more than 15 degrees. 10 TRIM THIS EDGE LEFT PAGE

  19. SAFETY/DECALS G Attach trailers and/or implements correctly. The operating, steering and braking behavior will be affected by attaching implements, trailers and ballast weights. Therefore ensure adequate steering and braking power. G Observe maximum permissible axle loads and total weights and tire capacities. G When making turns with towed or mounted implements, always take into consideration the width and inertia of the implement. Alt+ to display template information Alt= to hide template information LEAVING THE TRACTOR ! ! G When leaving the tractor, ensure that it will not roll away (apply park brake, wheel wedges) stop the engine. G Remove the main switch key and lock the operator s cab (when equipped). G Never leave the tractor unattended as long as the engine is still running. G Never leave the operator s platform/cab when driving. G Lower implement or equipment to the ground before leaving the tractor. TRIM THIS EDGE IMPLEMENTS ! ! G Attach implements and trailers to the tractor only using the prescribed drawbars or hitches. See page 94 G Take particular care when attaching trailers or implements. G Prevent trailer and implement from rolling away. G Operate tractor only when all guards are fitted and in their correct position. PTO OPERATION ! ! Template Date: 1994_04_29 Template Name: OM_1_col G Always shut off engine before connecting or disconnecting drive shaft. G When operating the PTO, no-one must be allowed to remain in the vicinity of the rotating PTO stub shaft or drive shaft. G Guards for drive shaft and PTO stub shaft must be fitted. See page 132 G High-inertia implements do not become stationary immediately when PTO is disengaged. Allow sufficient time for implement to slow down to a halt before cleaning or adjusting. G As soon as drive shaft has been removed, install guard over PTO stub shaft. 11 TRIM THIS EDGE RIGHT PAGE

  20. Suggest: If the above button click is invalid. Please download this document first, and then click the above link to download the complete manual. Thank you so much for reading

  21. SAFETY/DECALS SERVICE ! ! Template Date: 1994_04_29 Template Name: OM_1_col G Do not service the tractor with the engine running. Follow the instructions in this manual or see your dealer. G Escaping fluid (fuel or hydraulic oil) under high pressure can penetrate the skin and cause serious injury. If any fluid is injected into the skin, consult a doctor immediately as other-wise serious infections may result. G It is recommended that you know the location of a First Aid Kit and Fire Extinguisher and have access before servicing the machine. G Dispose of oil, fuel and filters in accordance with local regulations. Do not drain the oil on the ground or into a drain. Be responsible for the environment. G Do not attempt to mount a tire unless you have the proper equipment and experience to perform the job safely. See page 185 G Retighten wheel nuts after the specified hours in this manual. See page 199 See page 204 G Always disconnect the battery ground strap(s) before carrying out any electrical repairs on the machine. See page 293 G Use original manufacturers parts. Spare parts/service parts must comply with the manufacturers technical specifications. TRIM THIS EDGE BATTERY SAFETY ! ! Alt+ to display template information Alt= to hide template information G DO NOT make sparks or use an open flame near the battery. G BATTERY ACID CAUSES SEVERE BURNS. Batteries contain sulfuric acid. Avoid contact with skin, eyes or clothing. Antidote: EXTERNAL - flush with water. INTERNAL - Drink large quantities of water or milk. Follow with milk of magnesia, beaten egg or vegetable oil. Call A physician immediately. EYES - Flush with water for 15 minutes and get prompt medical attention. G BATTERIES PRODUCE EXPLOSIVE GASES. Keep sparks, flame and cigarettes away. Ventilate when charging or using in enclosed space. Always shield eyes when working near batteries. KEEP OUT OF REACH OF CHILDREN. G When working around storage batteries, remember that all of the exposed metal parts are live . Never lay a metal object across the terminals because a spark, short circuit, explosion or personal injury may result. 12 TRIM THIS EDGE LEFT PAGE

  22. https://www.ebooklibonline.com Hello dear friend! Thank you very much for reading. Enter the link into your browser. The full manual is available for immediate download. https://www.ebooklibonline.com

Related


More Related Content