Explore DAQ trigger challenges faced in the SoLID experiment through examples, including trigger goals, data readout specifics, and experiment setups. Learn about managing high luminosity, reducing data rates, improving signal quality, and handling bottleneck issues for effective data acquisition. D

0 views • 22 slides

Closeout report detailing the progress of the Incremental Preliminary Design and Safety Review of the EIC Detector DAQ and Electronics, along with the Final Design Review of Electronics Components for the ePIC Detector. The report includes responses to charge questions, panel reviews, comments, reco

0 views • 23 slides

Digital DAQ systems based on EPICS face issues with version control, data reading, trigger handling, and GUI consistency. Solutions involve code optimization, improving trigger management, and enhancing GUI design for better user experience.

2 views • 5 slides

Instrumentation Frontier activities are picking up pace after the pause in early 2021. Various groups are resuming meetings and workshops, with plans for White Paper kick-off and wrap-up workshops in the coming months. Each subgroup is organizing and categorizing LOIs to drive progress in Quantum Se

0 views • 13 slides

Belle2Link is a unified high-speed link connecting Front-End Electronics, Trigger, and DAQ systems for signal and data transmission. The system features unification in hardware, firmware, electrical isolation, and high-speed transmission rates. The demo system showcases hardware components like COPP

0 views • 21 slides

The data acquisition system discussed in this content utilizes the Area Detector framework as a versatile processing tool for handling data from various technical subsystems. It covers aspects such as DAQ architecture, high-speed data transfer methods, time-correlated data collection, and usage of A

0 views • 8 slides

GRANDproto project workshop held in May 2017 focused on improving autonomous radio detection efficiency for the detection of extensive air showers (EAS). Issues such as detector stability and background rates were discussed, with the goal of establishing radio detection as a reliable method for EAS

1 views • 14 slides

This report covers various aspects of experimental data analysis at the research facility, including the status of INGRID, DAQ, neutrino event rate, beam center stability, event timing, and a general summary with visual representations. The efficiency of data taking, delivery and recording of spills

0 views • 6 slides

Cutting-edge Front-End DAQ system featuring components like the Texas Instruments ADS6424 ADC, ALTERA 5CEFA4F23C6N FPGA, Ring Buffer for data management, u-blox Precision Timing GPS module for accurate time stamping, and General Slow Control Architecture for monitoring. The system utilizes Ethernet

0 views • 15 slides

Vibrato is a key texture in music, captivating Group 7's curiosity. They delve into the distinct characteristics of vibrato, utilizing a range of instruments and technology. Through collaboration, they meet weekly to advance their project on vibrato's impact, with a keen focus on instrumentation, DA

0 views • 10 slides

Outline of the SoLID collaboration meeting discussing DAQ requirements, trigger rates, infrastructure, and R&D items. Details on detector layouts and triggers for PVDIS and SIDIS, with information on SoLID requirements and associated risks. SoLID DAQ overview based on 12 GeV FADC electronics. Discus

0 views • 35 slides

SuperBigbite collaboration meeting between Alexandre Camsonne and team took place on July 13th, 2017, discussing various topics such as data reduction, network upgrades, DAQ disks, and more. Detailed discussions on expected trigger rates, GEM occupancy, data rates, front tracker layout, and trackers

0 views • 31 slides

Exploring the simulation modeling of event arrival time using a random number formula and understanding the implications through probability distributions and time calculations. Additionally, analyzing small event simulations in STAR DAQ TPC DAQ and discussing data transfer modeling, as well as divi

0 views • 4 slides

In the context of the ProtoDUNE project, the organization of DAQ and operational spaces is crucial for efficient functioning. The initial installation at CERN faced challenges, prompting the need for remote control capabilities. The setup at SURF requires a thoughtful layout to accommodate key subsy

0 views • 8 slides

Implementing full streaming readout with proposed sub-detector technologies and DAQ system concept poses challenges including proper data alignment, risks of data loss, and background noise affecting data rates. The transition point for electronic components from detector-specific to common solution

0 views • 9 slides

The Phase 0 Experiment involves including straw trackers in the program before PANDA commences at HADES. The upgrade features two new Forward Straw Tracker stations (STS1, STS2) for testing under experimental conditions. The physics program includes radiative hyperon decays, with STS1/2 tasked for s

0 views • 8 slides

Explore various hardware-oriented R&D projects including implementing a DPM for SLAC ATCA system, demonstrating software throughput, testing interfaces, examining timing systems, and setting realistic project timescales. Meetings and collaborations are geared towards enhancing R&D efforts and mergin

0 views • 8 slides

Shekhar Mishra conducted various tests and coordination activities on behalf of ICEBERG Neutrino Division at Fermilab. FEMB tests with BNL firmware revealed responsiveness improvements in LN2 compared to air. Furthermore, FEMBs in CTS with DAQ displayed consistent channel behavior differences betwee

0 views • 4 slides

Discussion on the desired features of a software build system for DUNE DAQ, including creating C++ builds, supporting multiple languages, handling multiple software versions, efficient change management, easy installation processes, modularity, and more. The aim is to streamline the software develop

0 views • 9 slides

The DArT-2 tests involve twin experiments - DArT-2 and DArT-Test, focusing on ensuring the performance of DArT-2 in studying underground argon. Various tests like electronic tests of the PDM and vacuum tests are conducted to guarantee proper operation. Challenges with vacuum sealing and solutions li

0 views • 8 slides

Status updates on the commissioning and installation progress of the SHMS detector system, including the noble gas Cerenkov mount optics, mirrors, drift chambers, and various hodoscopes. Details on the system status, high voltage signal cables, DAQ, gas computing, and schedules for detector installa

0 views • 9 slides

Data Acquisition Middleware (DAQ) plays a crucial role in managing data flow within the SuperNEMO setup. This includes components like source and sink ports, event managers, loggers, and monitors. The DAQ Middleware state machine controls the configuration, running, and pausing of the DAQ system. Ad

0 views • 12 slides

In the realm of detector electronics, the integration of the End-of-Stave Card with ePIC DAQ is explored extensively through the FLX expectations set by the Electronics and DAQ Working Group. This integration involves various components such as the Global Timing Unit (GTU), Collider interfaces, Run

0 views • 10 slides

The sPHENIX DAQ/Trigger system is the focus of this review, covering the hardware, procurements, technical status, and deliverables of the system. Key components include Data Collection Modules (DCM-II), SubEvent Buffers (SEB), control machines, and global level 1 system. The system aims to achieve

0 views • 21 slides

The Electronics & DAQ WG meeting covered topics such as ePIC synchronization, clock distribution, FELIX system requirements, RDO design, and fiber protocols. Discussions included high-level fiber protocol considerations and upcoming collaboration meetings to address issues related to rates, ASICs, a

0 views • 10 slides