Advanced Hardware Installation Project Overview
Hardware
Hubert van Hecke
Sanghoon Lim
Alex Wickes
Shaun Newman
Frames
4 frames for 1x1x80 cm bars
4 frames for 2x2x100 cm bars
Mostly finished
To be done:
•
Feedthroughs and/or patch
panels for cables
•
Cooling air feedthroughs
Readout plates
•
Fibers and preamps in the front
•
SiPMs connect with pigtails in the back
Full-scale mockup for cable routing and
connector finger space
Fabrication bids
are out
front
back
Calibration system
•
Use existing pulser board design
from Pat
•
1mm plastic fiber output
•
Fan out to 7 (19) clear 1mm
fibers
•
Insert these into each scintillator
bar
3D print
1->7 fanout
To be done:
•
Lay out pulser board with n
pulsers, and build
•
Cut and polish pulser fibers
•
Design mounting
Installation
•
4 boxes joined
•
2 vertical beams hold this assembly
•
Anchored to floor and overhead beams
To be done:
•
Details of mounting points
•
Safety review
•
Determine external cable routing
•
Cooling fans
Explore the progress of the hardware installation project, including frames, readout plates, calibration system, and installation details. Follow the development of feedthroughs, cooling systems, cabling, and mounting solutions as the project nears completion.
Download Presentation
Please find below an Image/Link to download the presentation.
The content on the website is provided AS IS for your information and personal use only. It may not be sold, licensed, or shared on other websites without obtaining consent from the author.If you encounter any issues during the download, it is possible that the publisher has removed the file from their server.
You are allowed to download the files provided on this website for personal or commercial use, subject to the condition that they are used lawfully. All files are the property of their respective owners.
The content on the website is provided AS IS for your information and personal use only. It may not be sold, licensed, or shared on other websites without obtaining consent from the author.
E N D
Presentation Transcript
Hardware Hubert van Hecke Sanghoon Lim Alex Wickes Shaun Newman
Frames 4 frames for 1x1x80 cm bars 4 frames for 2x2x100 cm bars Mostly finished To be done: Feedthroughs and/or patch panels for cables Cooling air feedthroughs
Readout plates Fibers and preamps in the front SiPMs connect with pigtails in the back Fabrication bids are out front back Full-scale mockup for cable routing and connector finger space
Calibration system Use existing pulser board design from Pat 1mm plastic fiber output Fan out to 7 (19) clear 1mm fibers Insert these into each scintillator bar To be done: Lay out pulser board with n pulsers, and build Cut and polish pulser fibers Design mounting 3D print 1->7 fanout
Installation 4 boxes joined 2 vertical beams hold this assembly Anchored to floor and overhead beams To be done: Details of mounting points Safety review Determine external cable routing Cooling fans
