Patch Panel Connector System Design and Installation Guide
Explore different designs for a patch panel connector system including plate and U-profile designs, with a focus on cable assembly and installation ease. The plan, final assembly, and issues encountered during installation are detailed alongside suggestions for resolving them. A comprehensive overview of the cable connections and empty connectors post-installation is provided.
Download Presentation
Please find below an Image/Link to download the presentation.
The content on the website is provided AS IS for your information and personal use only. It may not be sold, licensed, or shared on other websites without obtaining consent from the author. Download presentation by click this link. If you encounter any issues during the download, it is possible that the publisher has removed the file from their server.
E N D
Presentation Transcript
Patch Panel Connecter System
- Two systems - The first Idea: simple plate, 9 holes (connecters). - Second design: a U profile who can fit 10 holes. - - Both idea reuse hole on the PP to fix them. Both will probably use 2mm aluminium sheet.
- With Cables assembly or not - I think, with this position, it s easier to install, but need confirmation.
- Back view - 3D model of 5 mm cable - Nut of the connecter in 3D representation.
- 3D model of the adapter of ten connecters - Position of all 40 news cables. - Amount of cables to install in the cables rails support if there is a security length (72cables)
- Issue to stuck the nut, easier way to install the cables. Put narrow stick between. - Or use double nuts to stuck each other.
- There are 36 cables from news chambers (RE3_1 and RE4_1) and a total of 40 cables HV (2 of 40mm of 20 cables) so after the installation we will have 4 connecter empty from the chambers. - Top view, just enough space to tighten the nut.
D - From the big cable chain - From the chamber
