Precision Assembly Lab Guidelines
Precision Assembly
HOW TO PERFORM A LAB
HOW TO PERFORM A LAP
1. The instructor will assign the lab or labs to be
performed.
We may work multiple labs at one time.
HOW TO PERFORM A LAP
2. You will read the lab in its entirety
By doing this you will find out what materials and
tooling will be required.
If you find that you can not perform the lab as stated
in your lab book you will ask the instructor what
action to take.
This could take time due to your instructor assisting
other students.
HOW TO PERFORM A LAP
3. If you need parts, equipment or tooling.
A. Go to the tool crib.
B. Ask the tool crib operator for the materials you
are requiring.
Be specific!!!!
Examples. “I need a bolt?”,
WRONG!!!
“I need AN4-11
bolt”,
CORRECT!!!
. “I need a torque wrench”,
WRONG!!!
“I
need a ¼” drive torque wrench with a range of 50 to 75
inch pounds”,
CORRECT!!!
Say “Thank you”
HOW TO PERFORM A LAP
4. If you need assistance understanding the lab
you will ask your instructor, NOT ANOTHER
STUDENT!
Yes, once again wait for the instructor to help you.
A student is a person like yourself, how do you know
they are doing it right.
If you need assistance such as lifting something or
asking their opinion, Yes please ask your classmates.
HOW TO PERFORM A LAP
5. If your lab has not turned out the way you were
hoping. You do not go and re-do it.
The school has only prepared enough materials for
these classes and if you keep doing it over and over
you are taking from the next class or even your own
class.
GO TO YOUR INSTRUCTOR FOR HELP.
HOW TO PERFORM A LAP
6. At the end of every lab, you will fill out the lab
book stating exactly what you have done.
Examples: “Made cable”
WRONG!!!!
“Fabricated
cable I.A.W AC 43.13 1B par 7-148 section C”,
CORRECT!!!
“ Saftied turnbuckle”
WRONG!!!!
“Saftied
Turnbuckle I.A.W AC 43.13 1B par 7-180”,
CORRECT!!!
Leaving early
If you must leave early?
1. Tell your instructor.
If you believe your instructor might forget that you
asked or does not know your name. Ask him or her to
mark it in on his or her rooster.
Leaving early
2. If your instructor takes attendance at the end of
class and you are not accounted for you will be
marked gone for the entire day and will make up the
time.
So, it would be better for you to verify that your
instructor has marked that you have gone for the day.
Leaving early
3.
This is for your safety incase of an emergency.
Finally
1. Remember your instructors are dealing with
several students at one time.
2. Your problems are just as important as
other students problems.
BE PATIENT!!!
Disclaimer and License information
This workforce product was funded by a grant awarded by the U.S. Department of Labor’s Employment and Training Administration. The product was created by the grantee and does not necessarily reflect the official position of the U.S. Department of Labor. The U.S. Department of Labor makes no guarantees, warranties, or assurances of any kind, express or implied, with respect to such information, including any information on linked sites and including, but not limited to, accuracy of the information or its completeness, timeliness, usefulness, adequacy, continued availability, or ownership.
Unless otherwise noted, this work is licensed under the Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0). To view a copy of this license, go to https://creativecommons.org/licenses/by-nc/4.0/on your web browser.
This guide provides step-by-step instructions on how to perform a precision assembly lab effectively. From understanding lab assignments to seeking assistance and proper documentation, this resource covers key aspects to ensure a successful lab experience. Following these instructions will help you navigate the lab process efficiently and make the most out of your practical work. Remember to consult your instructor for any clarifications or support needed along the way.
Download Presentation
Please find below an Image/Link to download the presentation.
The content on the website is provided AS IS for your information and personal use only. It may not be sold, licensed, or shared on other websites without obtaining consent from the author.If you encounter any issues during the download, it is possible that the publisher has removed the file from their server.
You are allowed to download the files provided on this website for personal or commercial use, subject to the condition that they are used lawfully. All files are the property of their respective owners.
The content on the website is provided AS IS for your information and personal use only. It may not be sold, licensed, or shared on other websites without obtaining consent from the author.
E N D
Presentation Transcript
Precision Assembly HOW TO PERFORM A LAB
HOW TO PERFORM A LAP 1. The instructor will assign the lab or labs to be performed. We may work multiple labs at one time.
HOW TO PERFORM A LAP 2. You will read the lab in its entirety By doing this you will find out what materials and tooling will be required. If you find that you can not perform the lab as stated in your lab book you will ask the instructor what action to take. This could take time due to your instructor assisting other students.
HOW TO PERFORM A LAP 3. If you need parts, equipment or tooling. A. Go to the tool crib. B. Ask the tool crib operator for the materials you are requiring. Be specific!!!! Examples. I need a bolt? , WRONG!!! I need AN4-11 bolt , CORRECT!!!. I need a torque wrench , WRONG!!! I need a drive torque wrench with a range of 50 to 75 inch pounds , CORRECT!!! Say Thank you
HOW TO PERFORM A LAP 4. If you need assistance understanding the lab you will ask your instructor, NOT ANOTHER STUDENT! Yes, once again wait for the instructor to help you. A student is a person like yourself, how do you know they are doing it right. If you need assistance such as lifting something or asking their opinion, Yes please ask your classmates.
HOW TO PERFORM A LAP 5. If your lab has not turned out the way you were hoping. You do not go and re-do it. The school has only prepared enough materials for these classes and if you keep doing it over and over you are taking from the next class or even your own class. GO TO YOUR INSTRUCTOR FOR HELP .
HOW TO PERFORM A LAP 6. At the end of every lab, you will fill out the lab book stating exactly what you have done. Examples: Made cable WRONG!!!! Fabricated cable I.A.W AC 43.13 1B par 7-148 section C , CORRECT!!! Saftied turnbuckle WRONG!!!! Saftied Turnbuckle I.A.W AC 43.13 1B par 7-180 , CORRECT!!!
Leaving early If you must leave early? 1. Tell your instructor. If you believe your instructor might forget that you asked or does not know your name. Ask him or her to mark it in on his or her rooster.
Leaving early 2. If your instructor takes attendance at the end of class and you are not accounted for you will be marked gone for the entire day and will make up the time. So, it would be better for you to verify that your instructor has marked that you have gone for the day.
Leaving early 3. This is for your safety incase of an emergency.
Finally 1. Remember your instructors are dealing with several students at one time. 2. Your problems are just as important as other students problems. BE PATIENT!!!
