Innovative Design Enhancements for Carbon Beam Pipe Assembly
Innovative design enhancements have been implemented for the carbon beam pipe assembly, including detachable pipes with redesigned ends, mounting tools for easier assembling, and special pipe end shapes for precise installation. Wall thicknesses have been optimized, and the final design version is now available for review and feedback.
Download Presentation
Please find below an Image/Link to download the presentation.
The content on the website is provided AS IS for your information and personal use only. It may not be sold, licensed, or shared on other websites without obtaining consent from the author. Download presentation by click this link. If you encounter any issues during the download, it is possible that the publisher has removed the file from their server.
E N D
Presentation Transcript
BM@N carbon beam pipe M. Janda1, F. Lopot1, M. Rachac1 P. Chudoba2, A. Kugler2, V. Kushpil2 1Faculty of Mechanical Engineering of the Czech Technical University 2Nuclear physics institute, The Czech Academy of Sciences chudoba@ujf.cas.cz October 21, 2020
Updated BP design 4. All of the pipes (1.-4.) are detachable Ends of the pipes are redesigned as required Mounting tools (a,b) for easier assembling are added b 3. detachable 2. a a 1. detachable
Updated BP design Mounting tools for easier assembling were added o Wall thicknesses are as low as possible (2.8 mm and 3.15 mm) o The length of these walls is not more than 100 mm
Updated BP design Ends of the pipes are redesigned as required o To find the exact pipes position a special pipe end shapes are developed o Mounting tools are developed for precise and simple installation Special pipe shape Simple and precise instalation Mounting tool
Updated BP design From my point of view, this is the final design version If you have any comments or questions, do not hesitate to contact marek.rachac@gmail.com
