Caterpillar Cat CB-214E Vibratory Compactor (Prefix 214) Service Repair Manual Instant Download (21400001 and up)

cb 214e cb 224e cb 225e vibratory compactor l.w
1 / 34
Embed
Share

Please open the website below to get the complete manualnn//

rayaanacharya
Douglas2 Follow

Uploaded on | 1 Views

Download Presentation

Please find below an Image/Link to download the presentation.

The content on the website is provided AS IS for your information and personal use only. It may not be sold, licensed, or shared on other websites without obtaining consent from the author. Download presentation by click this link. If you encounter any issues during the download, it is possible that the publisher has removed the file from their server.

E N D

Presentation Transcript

  1. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 1/3 Product: VIBRATORY COMPACTOR Model: CB-214E VIBRATORY COMPACTOR 214 Configuration: CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POWERED BY 3013C Engine Disassembly and Assembly 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Media Number -SENR5027-05 Publication Date -01/05/2005 Date Updated -16/05/2005 i04583132 Fuel Injection Pump - Remove SMCS - 1251-011 Removal Procedure Start By: A. Remove the fuel injection lines. Refer to Disassembly and Assembly, "Fuel Injection Lines - Remove and Install". B. If necessary, remove the fuel shutoff solenoid. Refer to Disassembly and Assembly, "Fuel Shutoff Solenoid - Remove and Install". NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  2. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 2/3 Dispose of all fluids according to local regulations and mandates. Illustration 1 g00825132 Illustration 2 g00825137 1. Remove bolts (4) and nuts (2) that fasten the fuel injection pump to the cylinder block. 2. Carefully raise fuel injection pump (1) from the cylinder block and remove clip (7) that connects link (6) to fuel rack control (5) . https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  3. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 3/3 3. Remove fuel injection pump (1) from the cylinder block. Note: Record the thickness of each shim and the number of shims for reassembly. The fuel injection timing is determined by the shim pack thickness that is between the fuel injection pump and the mounting face on the cylinder block. For more information on the fuel injection pump, refer to Specifications, "Fuel Injection Pump". 4. Remove shims (3) from the mounting plate. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  4. https://www.ebooklibonline.com Hello dear friend! Thank you very much for reading. Enter the link into your browser. The full manual is available for immediate download. https://www.ebooklibonline.com

  5. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 1/3 Product: VIBRATORY COMPACTOR Model: CB-214E VIBRATORY COMPACTOR 214 Configuration: CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POWERED BY 3013C Engine Disassembly and Assembly 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Media Number -SENR5027-05 Publication Date -01/05/2005 Date Updated -16/05/2005 i01591134 Fuel Injection Pump - Install SMCS - 1251-012 Installation Procedure NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  6. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 2/3 Illustration 1 g00825132 1. Position the correct number of shims (3) on the mounting face of the cylinder block. Refer to Specifications, "Fuel Injection Pump". Illustration 2 g00825137 2. Position fuel injection pump (1) close to the mounting face of the cylinder block, and connect link (6) and fuel rack control (5) with clip (7) . 3. Put fuel injection pump (1) in position on the mounting face of the cylinder block. 4. Install bolts (4) and nuts (2) that fasten the fuel injection pump to the cylinder block. Tighten bolts (4) and nuts (2) to the following torque. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  7. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 3/3 3003 Engine ... 6 N m (4 lb ft) 3013, 3014, and 3024 Engines ... 15 N m (11 lb ft) 3024C Engine ... 15 N m (11 lb ft) End By: a. Install the fuel shutoff solenoid. Refer to Disassembly and Assembly, "Fuel Shutoff Solenoid - Remove and Install". b. Install the fuel injection lines. Refer to Disassembly and Assembly, "Fuel Injection Lines - Remove and Install". https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  8. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 1/3 Product: VIBRATORY COMPACTOR Model: CB-214E VIBRATORY COMPACTOR 214 Configuration: CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POWERED BY 3013C Engine Disassembly and Assembly 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Media Number -SENR5027-05 Publication Date -01/05/2005 Date Updated -16/05/2005 i01893805 Exhaust Manifold - Remove and Install SMCS - 1059-010 Removal Procedure NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  9. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 2/3 Illustration 1 g00825291 Typical example 1. Remove exhaust manifold nuts (5) and bolts (6) . 2. Remove exhaust manifold (4) from the cylinder head (1) . 3. Remove gasket (3) from the cylinder head. 4. Remove any remaining gasket material and carbon from the cylinder head and the exhaust manifold. Be careful not to damage the mating surface on the cylinder head for the exhaust manifold. 5. Remove studs (2) for exhaust manifold (4) from cylinder head (1) . Installation Procedure NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. Illustration 2 g00825291 Typical example https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  10. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 3/3 1. If studs (2) were removed during disassembly, install attaching studs (2) to cylinder head (1) . 2. Put a new exhaust manifold gasket (3) in position on cylinder head (1) . Note: Do not use any sealant on the exhaust manifold gasket. 3. Put exhaust manifold (4) in position on cylinder head (1) . 4. Install exhaust manifold nuts (5) and bolts (6) . For 3013C Engines and 3024C Engines, tighten nuts (5) and bolts (6) to a torque of 25 N m (18 lb ft). For 3011C Engines, tighten nuts (5) and bolts (6) to a torque of 10 N m (89 lb in). Note: Tighten the two inner bolts first on three cylinder engines. Tighten the four inner bolts first on four cylinder engines. Then tighten the two outer bolts and the two nuts. Ensure that the bolts with different lengths are installed in the correct holes. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  11. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 1/3 Product: VIBRATORY COMPACTOR Model: CB-214E VIBRATORY COMPACTOR 214 Configuration: CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POWERED BY 3013C Engine Disassembly and Assembly 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Media Number -SENR5027-05 Publication Date -01/05/2005 Date Updated -16/05/2005 i01481961 Inlet Manifold - Remove - 3013, 3014, and 3024 Engines SMCS - 1058-011 S/N - 2141-UP S/N - 3TW1-UP S/N - 4AZ1-UP S/N - 4CZ1-UP S/N - 4HW1-UP S/N - 4ZW1-UP S/N - 7ES1-UP S/N - 8FG1-UP S/N - 9TJ1-UP S/N - AFW1-UP S/N - ANR1-UP S/N - CSS1-UP Removal Procedure NOTICE Keep all parts clean from contaminants. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  12. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 2/3 Contaminants may cause rapid wear and shortened component life. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. Note: The inlet manifold that is used on the 3013, 3014, and 3024 Engines is removable as a separate part. The inlet manifold on the 3003 Engine is part of the valve mechanism cover. Illustration 1 g00592847 1. Remove bolts (1) and inlet manifold (2) from the cylinder head. 2. Remove the gasket for the inlet manifold from the spacer plate. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  13. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 3/3 Illustration 2 g00592858 3. Remove spacer plate (3) for the inlet manifold. Illustration 3 g00592865 4. Remove spacer plate gasket (4) for the inlet manifold from the cylinder head. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  14. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 1/3 Product: VIBRATORY COMPACTOR Model: CB-214E VIBRATORY COMPACTOR 214 Configuration: CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POWERED BY 3013C Engine Disassembly and Assembly 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Media Number -SENR5027-05 Publication Date -01/05/2005 Date Updated -16/05/2005 i01472822 Inlet Manifold - Install - 3013, 3014, and 3024 Engines SMCS - 1058-012 S/N - 2141-UP S/N - 3TW1-UP S/N - 4AZ1-UP S/N - 4CZ1-UP S/N - 4HW1-UP S/N - 4ZW1-UP S/N - 7ES1-UP S/N - 8FG1-UP S/N - 9TJ1-UP S/N - AFW1-UP S/N - ANR1-UP S/N - CSS1-UP Installation Procedure NOTICE Keep all parts clean from contaminants. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  15. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 2/3 Contaminants may cause rapid wear and shortened component life. Note: The inlet manifold that is used on the 3013, 3014 and 3024 Engines is removable as a separate part. The inlet manifold on the 3003 engine is part of the valve mechanism cover. 1. Clean the cylinder head surface and the spacer plate for the inlet manifold. Ensure that no debris or gasket material is remaining on the mating surfaces. Illustration 1 g00592865 2. Install new spacer plate gasket (4) for the inlet manifold on the cylinder head. Illustration 2 g00592858 3. Install spacer plate (3) for the inlet manifold. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  16. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 3/3 Illustration 3 g00592847 4. Install a new gasket for the inlet manifold and position inlet manifold (2) on the cylinder head. 5. Install bolts (1) that fasten the inlet manifold to the cylinder head and tighten bolts (1) to the following torque: 3013 Engine ... 10 N m (90 lb in) 3014 and 3024 Engines ... 14 N m (10 lb ft) https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  17. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 1/4 Product: VIBRATORY COMPACTOR Model: CB-214E VIBRATORY COMPACTOR 214 Configuration: CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POWERED BY 3013C Engine Disassembly and Assembly 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Media Number -SENR5027-05 Publication Date -01/05/2005 Date Updated -16/05/2005 i02399171 Inlet and Exhaust Valve Springs - Remove and Install SMCS - 1108-010 Removal Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 9U-6195 Valve Spring Compressor 1 Start By: A. Remove the rocker shaft. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove". NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. Note: Before you begin the removal of the valve springs, refer to Specifications, "Cylinder Head Valves" and Testing and Adjusting, "Cylinder Head - Inspect" for appropriate information on the valve springs. NOTICE Do not turn the crankshaft while the valve springs are removed. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  18. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 2/4 1. Ensure that the piston is at the top center position. Illustration 1 g00825744 Personal injury can result from parts and/or covers under spring pressure. Spring force will be released when covers are removed. Be prepared to hold spring loaded covers as the bolts are loosened. 2. Use Tooling (A) to compress valve springs (1) . Remove valve keepers (2) . NOTICE Ensure that the valve spring is compressed squarely or damage to the valve stem may occur. 3. Release the pressure on Tooling (A) . Remove valve spring retainer (3) and valve springs (1) from the cylinder head. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  19. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 3/4 NOTICE Do not turn the crankshaft while the valve springs are removed. Installation Procedure Table 2 Required Tools Tool Part Number Part Description Qty A 9U-6195 Valve Spring Compressor 1 NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. Illustration 2 g00825744 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  20. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 4/4 Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. 1. Place new valve springs (1) into position on the cylinder head. Note: Ensure that the closed damper coils are toward the cylinder head if double valve springs are used. 2. Install valve spring retainer (3) . 3. Use Tooling (A) to compress valve springs (1) . NOTICE Ensure that the valve spring is compressed squarely or damage to the valve stem may occur. 4. Install valve keepers (2) in order to lock the valve springs in position. 5. Release the pressure slowly on Tooling (A) . Remove Tooling (A) . Strike the top of the valves with a soft faced hammer in order to ensure that the valve keepers are properly installed. End By: Install the rocker shaft. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install". https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  21. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 1/6 Product: VIBRATORY COMPACTOR Model: CB-214E VIBRATORY COMPACTOR 214 Configuration: CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POWERED BY 3013C Engine Disassembly and Assembly 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Media Number -SENR5027-05 Publication Date -01/05/2005 Date Updated -16/05/2005 i02015360 Inlet and Exhaust Valves - Remove and Install SMCS - 1105-010 Removal Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 9U-6195 Valve Spring Compressor 1 Start By: A. Remove the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Remove". NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. 1. Clean the bottom face of the cylinder head. Use a dial indicator to check the depth of the valves below the face of the cylinder head before the valve springs are removed. Refer to the Specifications, "Cylinder Head Valves" for the correct dimensions. 2. Place an index mark on the heads of the inlet valves and the exhaust valves for installation purposes. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  22. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 2/6 Illustration 1 g00659252 Illustration 2 g00825746 The valve spring keepers can be thrown from the valve when the valve spring compressor is released. Ensure that the valve spring keepers are properly installed on the valve stem. To help prevent personal injury, keep away from the front of the valve spring keepers and valve springs during the installation of the valves. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  23. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 3/6 3. Use Tooling (A) to compress valve springs (3) . 4. Remove two valve keepers (1) . 5. Slowly release the pressure on Tooling (A) and remove Tooling (A) . 6. Remove valve spring retainers (2) . 7. Remove valve springs (3) . 8. Remove valve stem seals (4) . 9. Remove valve spring seat washers (5) . 10. Remove inlet valves (6) and exhaust valves (6) . Removal Procedure (Alternate Method) Table 2 Required Tools Tool Part Number Part Description Qty B 5S-1330 Valve Spring Compressor 1 Follow the instructions above using Tooling (B) . Installation Procedure Table 3 Required Tools Tool Part Number Part Description Qty A 9U-6195 Valve Spring Compressor 1 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  24. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 4/6 Illustration 3 g00659252 Illustration 4 g00825746 NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  25. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 5/6 The valve spring keepers can be thrown from the valve when the valve spring compressor is released. Ensure that the valve spring keepers are properly installed on the valve stem. To help prevent personal injury, keep away from the front of the valve spring keepers and valve springs during the installation of the valves. 1. Lubricate the stems of inlet valves (6) and the stems of exhaust valves (6) with clean engine oil. 2. Install inlet valves (6) and exhaust valves (6) in the respective positions. 3. Install valve spring seat washers (5) . 4. Install new valve stem seals (4) . 5. Install valve springs (3) . Note: Install valve springs (3) on the valve spring seat washers. This is done with double valve springs. 6. Install valve spring retainers (2) . 7. Use Tooling (A) to compress valve springs (3) . 8. Install valve keepers (1) . 9. Slowly release the pressure on Tooling (A) and remove Tooling (A). Strike the top of the valves with a soft hammer in order to ensure that the valve keepers are properly installed. Note: Refer to Specifications, "Cylinder Head Valves" for more information on the inlet valves and the exhaust valves. 10. Use a dial indicator to check the depth of the new valves below the cylinder head. If the depth of the new valves is below the correct depth, the valve seat inserts must be replaced. End By: Install the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Install". Installation Procedure (Alternate Method) Table 4 Required Tools Tool Part Number Part Description Qty B 5S-1330 Valve Spring Compressor 1 Follow the procedure above using Tooling (B). https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  26. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 1/3 Product: VIBRATORY COMPACTOR Model: CB-214E VIBRATORY COMPACTOR 214 Configuration: CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POWERED BY 3013C Engine Disassembly and Assembly 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Media Number -SENR5027-05 Publication Date -01/05/2005 Date Updated -16/05/2005 i01591441 Engine Oil Relief Valve - Remove and Install SMCS - 1315-010 Removal Procedure NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  27. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 2/3 Illustration 1 g00820218 1. Remove engine oil relief valve (2) from the cylinder block. 2. Remove O-ring seal (1) from the engine oil relief valve. Installation Procedure NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  28. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 3/3 Illustration 2 g00820218 1. Install new O-ring seal (1) on engine oil relief valve (2) . 2. Lubricate engine oil relief valve (2) with clean engine oil. 3. Install engine oil relief valve (2) in the cylinder block. Tighten the engine oil relief valve to a torque of 64 N m (47 lb ft). https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  29. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 1/4 Product: VIBRATORY COMPACTOR Model: CB-214E VIBRATORY COMPACTOR 214 Configuration: CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POWERED BY 3013C Engine Disassembly and Assembly 3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Media Number -SENR5027-05 Publication Date -01/05/2005 Date Updated -16/05/2005 i02399591 Engine Oil Pump - Remove SMCS - 1304-011 Removal Procedure Start By: A. Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install". B. Remove the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Remove". NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. NOTICE If the front housing is not installed, do not turn the crankshaft. Damage to the engine may occur. NOTICE https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  30. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 2/4 Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. Engine Oil Pump Illustration 1 g00825411 Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  31. Suggest: For more complete manuals. Please go to the home page. https://www.ebooklibonline.com If the above button click is invalid. Please download this document first, and then click the above link to download the complete manual. Thank you so much for reading

  32. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 3/4 1. Remove retaining ring (9) that retains idler gear (3) on idler hub (1) . 2. Remove the following items from idler hub (1) : Collar (8) Spring (7) Shim (6) Oil pump cover (5) Inner rotor (4) 3. Remove idler gear (3) from idler hub (1) . 4. Remove thrust washer (2) from idler hub (1) . 5. Inspect all the components for wear or damage. If components are worn or damaged, use new parts for replacement. Note: Refer to Specifications, "Engine Oil Pump" for more information. 6. If the engine oil pump has excessive buildup of sludge, inspect the oil strainer. The oil strainer can be removed by using the following procedure: a. Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install". Illustration 2 g00825406 b. Remove bolts (12) and oil strainer (13) from the cylinder block. Inspect the oil strainer for damage. If the oil strainer is damaged, use a new part for replacement. c. Remove tube assembly (11) from the cylinder block. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  33. CB-214E,CB-224E,CB-225E Vibratory Compactor 21400001-UP (MACHINE) POW... 4/4 d. Remove O-ring seal (10) from the tube assembly. Inspect the O-ring seal for wear or damage. If the O-ring seal is worn or damaged, use a new part for replacement. Idler Hub Table 1 Required Tools Tool Part Number Part Description Qty A 1P-0074 Slide Hammer Puller 1 Illustration 3 g01037604 1. Use Tooling (A) to remove idler hub (1) from the cylinder block. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis... 2023/2/28

  34. https://www.ebooklibonline.com Hello dear friend! Thank you very much for reading. Enter the link into your browser. The full manual is available for immediate download. https://www.ebooklibonline.com

Related


Understanding Linear Optimization in MS&E 214

Understanding Linear Optimization in MS&E 214

dseng
Elite Submersible Pumps: Quality ESP Solutions in Dallas, TX

Elite Submersible Pumps: Quality ESP Solutions in Dallas, TX

roma
Supportive Services for Veteran Families (SSVF) Program Overview

Supportive Services for Veteran Families (SSVF) Program Overview

caterina
Federal Regulations Governing F-1 International Student Visa

Federal Regulations Governing F-1 International Student Visa

klara
Understanding Resistive Circuits in Electrical Circuit Theory Class

Understanding Resistive Circuits in Electrical Circuit Theory Class

arnav
Anglophone South School District (ASD-S) Infrastructure Planning Overview

Anglophone South School District (ASD-S) Infrastructure Planning Overview

izabella
Field Compaction Equipment and Methods in Highway Engineering

Field Compaction Equipment and Methods in Highway Engineering

ame_sho
Effective Compaction Techniques for Civil Engineering Projects

Effective Compaction Techniques for Civil Engineering Projects

emer_va
Comprehensive Guide to Highway Soil Compaction Methods and Equipment

Comprehensive Guide to Highway Soil Compaction Methods and Equipment

annasta
Understanding Cat Body Language: A Comprehensive Guide

Understanding Cat Body Language: A Comprehensive Guide

kar_sa
Understanding Cat Aggression and How to Deal with It

Understanding Cat Aggression and How to Deal with It

nyear
Impending Cuts to Accident Benefits: A Comprehensive Review

Impending Cuts to Accident Benefits: A Comprehensive Review

evertonha
The Cat and the Bell: A Charming Story of Surprise

The Cat and the Bell: A Charming Story of Surprise

will_omo
Greedy Cat - A Fun and Entertaining Story by Kauri

Greedy Cat - A Fun and Entertaining Story by Kauri

kar_b
IPv6 Networking Considerations in xDSL Networks

IPv6 Networking Considerations in xDSL Networks

nrari
Exploring Words with the Prefix

Exploring Words with the Prefix "bi-" for Children

kburk
Enhancing Interdomain Routing Security with RPKI

Enhancing Interdomain Routing Security with RPKI

yunker_b
The Future of Computer-Assisted Translation: Insights and Trends

The Future of Computer-Assisted Translation: Insights and Trends

bren_80
Service-Learning Project UCA's Feral Cat Population Fall 2017

Service-Learning Project UCA's Feral Cat Population Fall 2017

schenker_k
Detailed Pricing Information for 2019-20 Season Tickets and Game Tickets

Detailed Pricing Information for 2019-20 Season Tickets and Game Tickets

matteson_j
Nine Lives Cat Café - Tour Reflections and Recommendations

Nine Lives Cat Café - Tour Reflections and Recommendations

stiorra
Understanding Cat Fines in Marine Fuel Oil Contamination

Understanding Cat Fines in Marine Fuel Oil Contamination

christal
Analysis of 'The Black Cat' by Edgar Allan Poe

Analysis of 'The Black Cat' by Edgar Allan Poe

thibert_v
Analysis of Symbols in Edgar Allan Poe's 'The Black Cat'

Analysis of Symbols in Edgar Allan Poe's 'The Black Cat'

xaniyahk

More Related Content