Case IH MX80C MX90C and MX100C Tractors Supplement Operator’s Manual Instant Download (Publication No.9-80591S2)

MX80C, MX90C and MX100C Tractors Operator's Manual Supplement New Product Features 9-80591S2

6 THIS SAFETY ALERT SYMBOL INDICATES IMPORTANT SAFETY MESSAGES IN THIS MANUAL. WHEN YOU SEE THIS SYMBOL, , CAREFULL Y READ THE MESSAGE THAT FOLLOWS AND BE ALERT TO THE POSSIBILITY OF PERSONAL INJURY OR DEA TH. M171B If Safety Decals on this machine use the words Danger, Warning or Caution, which are defined as follows: DANGER: Indicates an immediate hazardous situation which if not avoided, will result in death or serious injury. The color associated with Danger is RED. WARNING: Indicates an potentially hazardous situation which if not avoided, will result in serious injury. The color associated with Warning is ORANGE. CAUTION: Indicates an potentially hazardous situation which if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices. The color associated with Caution is YELLOW. If Safety Decals on this machine are ISO two panel Pictorial, decals are defined as follows: The first panel indicates the nature of the hazard. The second panel indicates the appropriate avoidance of the hazard. Background color is YELLOW.IC'\ 6 WARNING IMPROPER OPERATION OF THIS MACHINE CAN CAUSE INJURY OR DEATH. BEFORE USING THIS MACHINE, MAKE CERTAIN THAT EVERY OPERATOR: Prohibition symbols such as \y X and 8 if used, are RED. Is instructed in safe and proper use of the machine. Reads and understands the Manual(s) pertaining to the machine. Reads and understands ALL Safety Decals on the machine. Clears the area of other persons. Learns and practices safe use of machine controls in a safe, clear area before operating this machine on a job site. It is your responsibility to observe pertinent laws and regulations and follow Case Corporation instructions on machine operation and maintenance. Bur 0-00000 2001 Case Corporation March, 1995 (Revised October, 1997) CASE and IH are registered trade marks of Case Corporation

TABLE OF CONTENTS TO THE OWNER .. ....... ...... ................ .............. ..... ....... ..... ...... .............. ... ......... 1 IDENTIFICATION NUMBERS/MACHINE COMPONENTS ............................ 2 P.LN. AND SERIAL NUMBERS...................................................................... :2 SAFETY/DECALS ............................................................................................ 3 ,SAFETY DECALS ........................................................................................... 3 INSTRUMENTS/CONTROLS ........................................................................... 4 OPERATORS SEAT ...... ...... ...... ..... .......... ............... ............... ........... ............. 4 OPERATING INSTRUCTIONS .. ...................... ........ ......... ......... ...................... 6 REAR POWER TAKEOFF . ......................... ............ ........ .................... ........... 6 FOLDABLE ROPS FRAME ........... ..... ............................. ...... ........ ...... ......... 14 SPECIFICATIONS .......................................................................................... 16 APPROXIMATE DIMENSIONS .................................................................... 16 APPROXIMATE WEIGHTS .......................................................................... 17

https://www.ebooklibonline.com Hello dear friend! Thank you very much for reading. Enter the link into your browser. The full manual is available for immediate download. https://www.ebooklibonline.com

THIS PAGE HAS BEEN LEFT BLANK INTENTIONALLY It

TO THE OWNER TO THE OWNER MX80C ROPS (Platform) TRACTOR MX100C CAB TRACTOR OHIl9S23() Use this supplement in addition to the information given in the Operators Manual. It contains additional information required to safely operate and service your tractor if equipped with new product features that have been introduced since the Operators Manual was released. DO NOT use this machine for any application or purpose other than those described in this manual. Consult an authorized dealer or the Case Corporation on changes, additions or modifications that can be required for this machine to comply with various country regulations and safety requirements. Unauthorized modifications may cause serious injury or death. Anyone making such unauthorized modifications is responsible for the consequences. 1

IDENTIFICATION NUMBERSIMACHINE COMPONENTS P.I.N. AND SERIAL NUMBERS - Tractor with ROPS (PlaHorm) Write your machine Model number, Product Identification Number (P.I.N.), and Serial numbers on the lines provided below. If needed, give these numbers to your Case dealer when you need parts or information for your machine. Keep the record and your Manufacturers Statement of Origin in a safe place. If the machine is stolen, report the numbers to your local Law Enforcement Agency. Number Locations 1. TRACTOR MODEL NUMBER: 2. PRODUCT IDENTIFICATION NUMBER: 3. PLATFORM ROPS SERIAL NUMBER: 2

SAFETYIDECALS SAFETY DECALS - Tractor with ROPS (Platform) IMPORTANT: Install new decals if the old decals are destroyed, lost. painted over or cannot be read. When parts are replaced that have decals, make sure you instali a new decal with each new part. New decals are available from your dealer. When you clean the decals, use only a cloth, water and soap. Do not use solvent, gasoline. etc. OECAL 1 - Part No. 220nSA2 A WARNING AVOID INJIJIIY DR O ATH !If!fDRE STARI1HG ENGINE. Ram! operatOlS II'IIIIMIl tm saIety inll!II!IiliIm and operatifl!l iRstructionL Ram! aU Il1IctOl salely S ! g n ~ Be SUl8 ethel people BIll clell! of Ifacto! and equipment. Be _ gear shift is in I'IilUlIiII 01 pm and PID COfItIot is off St8ft 8fI!Iin8 only ffcm seat SlIieIds BIll IO! fIIIIIlfIOlllCOOL Keap them in pIeca llf' RATIDR: WlttI ROf'S, always lruc:kIe end .' seat belt No fidel, QII tfllClOI III equipmQllt KeapI1e!uls. Iaet lWI dolhing eway fl1lrtl power iIIiM pelts, fOf road IImt ~ pedef$, use lIesbifI!IWMling unless ~ and keep SMV ainId!Q!I lad!la TIlACTOIlS CAN !If! Ul'SH: IIedute speed OOIllrIlS lWI rugl! groom!, Avoid slaap $lopes. Avoid It6f 1IIfM. N only !I1IrtIdtawbar,IIIJS8f . WtlfN TRACTDR HAS SmmD. EfI!IIIIIf p&'k look 01 bleke. ~ impIemenllll ground. Ili$$fl!lllllf Pl1.l. stOll engine, end wait tOl elllIlIWOOlIIl11 to stop belOfa mviting 01 clearing equipment OECAL 2 - Part No. 1985614C1 A WARNING Expltsioo and injury CiII rWt ftom tlle Ui8 of cold weatI1e! atarting .. witll tl1e!mo start. DO NOT INJECT GASOUNE OR ETH R INTO TIlE AlII INTAKE. 03001'.116 . l I m e STARTING AID WARNING law b y OECAL 3 - Part No. 250931 A 1 A WARNING --__ IIIltIiWf_OOlll'SU ustOl' IlOl'S _stArmr_ THt f'mlSIIIltlTY O I ' I ! I J U ! l ' f O nw:'!IlIICMI O O U r n l f _ O O I W f i T ~ 03981'.115 READ YOUR OPERATORS MANUAL ROPS FRAME CLEARANCE WARNING 3

Suggest: If the above button click is invalid. Please download this document first, and then click the above link to download the complete manual. Thank you so much for reading

INSTRUMENTS/CONTROLS OPERATORS SEAT - Tractor with ROPS (Platform) At.. LU can result. WARNING: Do not adjust the seat while driving. Loss of control and injury M536 Standard Seat with Mechanical Suspension _--tJIOO.. DI96K353 1. RIDE FIRMNESS ADJUSTMENT CONTROL - Turn knob as required. 2. FORE/AFT ADJUSTMENT CONTROL - Pull lever to right Adjust as required. seat and raise. Raise to full and 3. HEIGHT ADJUSTMENT CONTROL - release to lower. 4

https://www.ebooklibonline.com Hello dear friend! Thank you very much for reading. Enter the link into your browser. The full manual is available for immediate download. https://www.ebooklibonline.com