Case IH MAXXUM 100 MAXXUM 110 MAXXUM 115 MAXXUM 125 MAXXUM 140 Value and Limited Model Tractors Operator’s Manual Instant Download (Publication No.84264981)

MAXXUM 100 / MAXXUM 110 / MAXXUM 115 / MAXXUM 125 / MAXXUM 140 MAXXUM 100 MAXXUM 110 MAXXUM 115 MAXXUM 125 MAXXUM 140 Value and Limited Model Tractors Operator s Manual Print No. 84264981 3rd edition CASE English - April 2010 Replaces p/n 87717173 CASE 2010 CNH Europe Holding S.A. All Rights Reserved. Case IH is a registered trademark of CNH America LLC. FOR THOSE WHO DEMAND MORE

ORIGINALINSTRUCTIONS MAXXUM 100 MAXXUM 110 MAXXUM 115 MAXXUM 125 MAXXUM 140 Value and Limited Model Tractors Operator s Manual Print No. 84264981 3rd edition English - April 2010 Replaces p/n 87717173 CASE

Dealersstamp CASE Printed in France 2010 CNH Europe Holding S.A. All Rights Reserved. Case IH is a registered trademark of CNH America LLC. FOR THOSE WHO DEMAND MORE

https://www.ebooklibonline.com Hello dear friend! Thank you very much for reading. Enter the link into your browser. The full manual is available for immediate download. https://www.ebooklibonline.com

SECTION SUMMARY 1 - - General Information and Safety 2 - - Controls, Instruments and Operation 3 - - Field operation 4 - - Lubrication and Maintenance 5 - - Fault Finding 6 - - Accessories 7 - - Specifications 8 - - Delivery Report and First 50 hour Service Forms 9 - - Index

NOTES

TO THE OWNER This manual contains information concerning the adjustment and maintenance of your Case IH Maxxum 100, 110, 115, 125 and 140 Value and Limited Tractors. You have purchased a dependable machine, but only by proper care and operation can you expect to receive the performance and long service built into this tractor. Please have all operators read this manual carefully and keep it available for ready reference. This machine was designed to power and propel itself. It is intended to load and move materials with a variety of buckets and forks. Allied attachments built and supplied by other manufacturers can be used on the tractor where recommended and approved by Case IH. Your Case IH dealer will instruct you in the general operation of your tractor. (Refer to the Delivery Report at the back of this manual.) Your dealer s staff of factory-trained service technicians will be glad to answer any questions that may arise regarding the operation of your tractor. Your Case IH dealer carries a complete line of genuine Case IH service parts. These parts are manufactured and carefully inspected to insure high quality and accurate fitting of any necessary replacement parts. Be prepared to give your dealer the model and PIN number of the engine and tractor, when ordering parts. Locate these numbers now and record them below. Refer to the General Information section of this manual for the location of the model and PIN numbers of your tractor. Model Engine Model PIN Number Engine Serial Number IMPROVEMENTS CNH America LLC is continually striving to improve its products. We reserve the right to make improvements or changes when it becomes practical and possible to do so, without incurring any obligation to make changes or additions to the equipment sold previously.

CONTENTS Title Page Section 1 - - General Information and Safety To the Owner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ecology and the Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . International Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1--1 1--4 1--6 1--8 1--15 1--22 Section 2 - - Controls, Instruments and Operation Cab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Handbrake, Throttle and Foot Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Instrument Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Analog/Digital Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Synchro Shift Transmission (12 x 12) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Two--speed Powershift Transmission (24 x 24) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Semi--Powershift Transmission (16 x 16 and 17 x 16)) Differential Lock and Four Wheel Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2--9 2--26 2--33 2--35 2--38 2--68 2--74 2--85 2--104 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 3 - - Field Operation Important Information Using Jump Leads (Booster Cables) Starting the Engine Stopping the Engine Turn Assist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rear Power Take--Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Front Power Take--Off and Hydraulic Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical Lower Link Sensing Hydraulics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electronic Hitch Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic Remote Control Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Load Sensing Remote Control Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electro--Hydraulic Remote Control Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using Remote Hydraulic Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Three--point Hitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick Hitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Linkage stabilizers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Drawbars and Towing Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic Trailer Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Air-Operated Trailer Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Front Wheel Track Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rear Wheel Track Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ballasting and tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3--2 3--7 3--8 3--13 3--15 3--17 3--37 3--45 3--51 3--63 3--72 3--82 3--96 3--98 3--105 3--110 3--112 3--128 3--129 3--133 3--142 3--149

Section 4 - - Lubrication and Maintenance General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Guard Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lubrication and Maintenance Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Servicing: When Warning Lights Illuminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10--hour/daily service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50--hour service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100--hour service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300--hour service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600--hour service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200--hour/12 month service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200--hour/24 month service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800--hour service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Every 3 years . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General Maintenance -- as required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Protecting tractor electrical systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Storing the tractor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4--1 4--8 4--12 4--14 4--18 4--20 4--32 4--32 4--36 4--45 4--53 4--59 4--60 4--62 4--83 4--84 Section 5 - - Fault Finding Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Transmission -- 12 x 12 Synchro Shift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Transmission -- 24 x 24 Two--speed Powershift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Transmission -- 16 x 16 (17 x 16) Semi--Powershift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rear Three--Point Hitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5--1 5--2 5--5 5--6 5--7 5--8 5--9 5--10 5--10 5--11 Section 6 - - Accessories Auxiliary Headlights Battery Isolator Switch Loader Subframe and Control Valve (Joystick) Rear Remote Valve Zero Detent Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6--2 6--2 6--3 6--6

Section 7 - - Specification General Dimensions Vehicle Weights Lubricant and Fluid Capacities Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fuel System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Transmission Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rear Power Take-Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Front Power Take-Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maximum Operating Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Three-Point Hitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Remote control valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Front Three--Point Hitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Front Remote Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electrical Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hardware Torque Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7--2 7--10 7--12 7--14 7--14 7--15 7--15 7--16 7--16 7--17 7--17 7--17 7--18 7--19 7--25 7--25 7--26 7--26 7--28 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8--5 Section 8 - - First 50- -hour Service Forms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9--1 Section 9 - - Index

METRIC AND IMPERIAL UNITS ABBREVIATIONS RECOMMENDED SI (METRIC) UNITS IMPERIAL UNIT TYPICAL APPLICATIONS NAME SYMBOL NAME SYMBOL AREA Land area hectare square meter ha m2 acre square foot square inch square inch ha ft2 in2 in2 mm2 square millimetre ELECTRICITY ampere volt microfarad ohm A V F ampere volt microfarad ohm A V F FORCE kilonewton newton kN N pound pound Ib Ib FORCE PER LENGTH newton per metre N/m pound per inch Ib/in FREQUENCY megahertz kilohertz hertz MHz kHz Hz Megahertz kilohertz hertz MHz kHz Hz FREQUENCY - - ROTATIONAL r/min(a) rpm revolution per minute r/min rpm revolution per minute LENGTH kilometre meter centimetre millimetre micrometer km m cm mm m mile foot inch inch mi ft in in MASS kilogram gram milligram kg g mg pound ounce Ib oz

RECOMMENDED SI (METRIC) UNITS IMPERIAL UNIT TYPICAL APPLICATIONS NAME SYMBOL NAME SYMBOL POWER kilowatt watt kW W horsepower Btu per hour Btu per minute Hp Btu/hr Btu/min PRESSURE or STRESS (FORCE PER AREA) kilopascal kPa pound per square inch inch of mercury inch of water pound per square inch psi inHg inH2O psi pascal megapascal Pa Mpa TEMPERATURE (other than THERMODYNAMIC) degrees Celsius C degrees Fahrenheit F TIME hour minute second h min s hour minute second h min s TORQUE (includes BENDING MOMENT, MOMENT OF FORCE, and MOMENT OF A COUPLE) newton meter N m N m pound foot pound inch Ib ft Ib in VELOCITY kilometre per hour meter per second millimetre per second meter per minute km/h m/s mm/s m/min mile per hour foot per second inch per second foot per minute mph ft/s in/s ft/min VOLUME (includes CAPACITY) m3 yd3 cu yd in3 US gal UK gal US qt UK qt fl oz cubic meter cubic yard litre litre l l cubic inch US gallon UK gallon US quart UK quart fluid ounce millimetre ml

RECOMMENDED SI (METRIC) UNITS IMPERIAL UNIT TYPICAL APPLICATIONS NAME SYMBOL NAME SYMBOL VOLUME PER TIME (includes DISCHARGE and FLOW RATE) m3/min l/min ft3/min US gal/min UK gal/min cubic meter per minute litre per minute cubic foot per minute US gallon per minute millilitre per minute ml/min UK gallon per minute SOUND POWER LEVEL and SOUND PRESSURE LEVEL decibel dB decibel dB

SECTION 1 GENERAL INFORMATION AND SAFETY TO THE OWNER GENERAL CLEANING THE TRACTOR This Manual has been prepared to assist you in the correct procedure for running--in, driving and operating and for the maintenance of your new tractor. Read this Manual carefully. Your tractor is intended for use in agricultural applications. Your tractor is a state-of-the-art machine with sophisticated, electronic controls. This should be taken into consideration when cleaning the tractor, particularly if using a high pressure washer. Even though every precaution has been taken to safeguard electronic components and connections, the pressure generated by some of these machines is such that complete protection against water ingress cannot be guaranteed. normal and customary If at any time you require advice concerning your tractor, do not hesitate to contact your authorized dealer. He has factory trained personnel, genuine manufacturers parts and the necessary equipment to carry out all your service requirements. Whenusingahighpressurewasher,donotstandtoo close to the tractor and avoid directing the jet at electronic components, breathers, seals, filler caps, etc. Never direct a cold water jet at a hot engine or exhaust. electrical connections, Your tractor has been designed and built to give maximum performance, economy and ease of operation under a wide variety of operating conditions. Prior to delivery, the tractor was carefully inspected, both at the factory and by your dealer to ensure that it reaches you in optimum condition. To maintain this condition and ensure trouble--free operation, it is important that the routine services, as specified in Section 4 of this Manual, are carried out at the recommended intervals. ELECTRO-MAGNETIC INTERFERENCE (EMC) Interference may arise as a result of add-on equipment which may not necessarily meet the required standards. As such interference can result in serious malfunction of the unit and/or create unsafe situations, you must observe the following: OPERATORS MANUAL The maximum power of emission equipment (radio, telephones, etc.) must not exceed the limits imposed by the national authorities of the country where you use the tractor. The Operators Manual supplied with your tractor is an important source of information and should be stored safely. The electro-magnetic field generated by the add-on system should not exceed 24 V/m at any time and at any location in the proximity of electronic components. The manual is prepared specifically for your tractor so it is important that you make a note of the print number and issue date which can be found on the cover. In the event the manual is lost or damaged it can be replaced with the correct version. Failure to comply with these rules will render the Case IH warranty null and void. A storage pocket for the Operators Manual can be found on the rear of the seat. The manual should be kept in this pocket at all times when not in use. SAFETY Pages 1--8 to 1--30 inclusive list the precautions to be observed to ensure your safety and the safety of others. Read the safety precautions and follow the advice offered before operating the tractor. 1--1

SECTION 1 - - GENERAL INFORMATION AND SAFETY FIRST 50 HOUR SERVICE WARRANTY In Section 8, at the back of this Manual, you will find the 50--hour service reports. Your tractor is warranted according to legal rights in your country and the contractual agreement with the selling dealer. No warranty shall, however, apply if the tractor has not been used, adjusted and maintained according to the instructions given in the Operator s Manual. NOTICE:Itisimportantthe50hourserviceiscarried outasrecommendedtoensureyourtractorprovides optimum performance and efficiency. USE OF BIODIESEL FUELS After you have operated the tractor for 50 hours, take your tractor, together with this Manual, to your dealer. He will then perform the factory recommended 50 hour service and complete the service report sheets (pages8--1and8--3).Thefirstsheet(page8--1)isthe dealer s copy and should be removed by the dealer after the service has been carried out. The second sheet (page 8--3) is your copy of the service performed. Ensure that you and the dealer sign both copies. NOTICE:BeforeusingBiodieselfuelsinyourtractor, refer to the information on page NO TAG regarding the storage and use of Biodiesel fuels. EMISSION CONTROLS ATTENTION:The engine and fuel system on your machine is designed and built to government emissions standards. Tampering customers, operators and prohibited by law. Failure to comply could result in government fines, rework charges, invalid warranty, legalactionandpossibleconfiscationofthemachine until rework to original condition is completed. Engine service and/or repairs must be done by a certified technician only! by dealers, strictly SERVICE PARTS users is Itshouldbepointedoutthatgenuinepartshavebeen examined and approved by the Company. The installation and/or use of non-genuine products could have negative effects upon the design characteristics of your tractor and thereby affect it s safety. The Company is not liable for any damage caused by the use of non--genuine parts and accessories. Only genuine Case IH replacement parts should be used. The use of non-genuine parts may invalidate legal approvals associated with this product. It is prohibited to carry out any modifications to the tractor unless specifically authorized, in writing, by the After Sales Service department of the Company. 1--2

SECTION 1 - - GENERAL INFORMATION AND SAFETY END USER LICENCE AGREEMENT TERMS You have acquired a device ( DEVICE ) that includes Software licensed by CNH America LLC from Microsoft Licensing, GP or its affiliates ( MS ). Those installed software products of MS origin, as well as associated media, printed materials, and online or electronic documenta- tion ( SOFTWARE ) are protected by interna- tionalintellectualproperty laws and treaties.The SOFTWARE is licensed, not sold. All rights reserved. WARE OR AGAINST INFRINGEMENT. IF YOU HAVE RECEIVED ANY WARRANTIES RE- GARDING THE DEVICE OR THE SOFTWARE, THOSE WARRANTIES DO NOT ORIGINATE FROM, AND ARE NOT BINDING ON, MS. -- No Liability for Certain Damages. EXCEPT AS PROHIBITED BY LAW, MS SHALL HAVE NO LIABILITY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAM- AGES ARISING FROM OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE SOFTWARE. THIS LIMITATION SHALL AP- PLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE. INNO EVENTSHALL MS BE LIABLE FOR ANY AMOUNT IN EXCESS OF U.S. TWO HUNDRED AND FIFTY DOLLARS (U.S. $250.00) IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT ( EULA 0, DO NOT USE THE DEVICE OR COPY THE SOFT- WARE.iNSTEAD,PROMPTLYCONTACTCNH AMERICA LLC FOR INSTRUCTIONS ON RETURN OF THE UNUSED DEVICE(S) FOR A REFUND. ANY USE OF SOFTWARE INCLUD- ING BUT NOT LIMITED TO USE ON THE DEVICE, WILL CONSTITUTE YOUR AGREE- MENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS CONSENT.) -- Limitations on Reverse Engineering, De- - compilation, and Disassembly. You may not reverseengineer,decompile,ordisassemblethe SOFTWARE, except and only to the extent that such activity is expressly permitted by applica- tion law notwithstanding this limitation. GRANT OF SOFTWARE LICENSE. This EULA grants you the following license: -- You may use the SOFTWARE only on the DEVICE. -- SOFTWARE TRANSFER WITH RESTRICTIONS. You may permanently transfer rights under this EULA only as part of a permanent sale or transfer of the DEVICE, and only if the recipient agrees to this EULA. If the SOFTWARE is an upgrade, any transfer must also include all prior versions of the SOFT- WARE. ALLOWED BUT -- NOT FAULT TOLERANT. THE SOFTWARE IS NOT FAULT TOLERANT. CNH AMERICA LLC HAS INDEPENDENTLY DETERMINED HOW TO USE THE SOFTWARE IN THE DEVICE, AND MS HAS RELIED UPON CNH AMERICA LLC TO CONDUCT SUFFICIENT TESTING TO DETERMINE THAT THE SUITABLE FOR SUCH USE. SOFTWARE IS -- EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is subject to U.S. export jurisdiction. You agree to comply with all applicable international and national laws that apply to the SOFTWARE, including the U.S. Export Administration Regulations, as well as end-user, end-use and destination restrictions issued by U.S. and other governments. For additional information see http://www.micro- soft.com/exporting/. -- NOWARRANTIESFORTHESOFTWARE.THE SOFTWARE is provided AS IS and with all faults. THE ENTIRE RISK AS TO SATISFAC- TORY QUALITY, PERFORMANCE, ACCURA- CY AND EFFORT (INCLUDING LACK OF NEGLIGENCE) IS WITH YOU. ALSO, THERE ISNOWARRANTYAGAINSTINTERFERENCE WITH YOUR ENJOYMENT OF THE SOFT- 1--3

SECTION 1 - - GENERAL INFORMATION AND SAFETY PRODUCT IDENTIFICATION The tractor and major components are identified using serial numbers and/or manufacturing codes. Tractor identification data must be supplied to the dealerwhenrequestingparts orserviceandwillalso be needed to aid in identifying the tractor if it is ever stolen. 1 The identification data. following provides the locations of the 8 Vehicle Identification Plate The vehicle identification plate (1), Figure 8 is locatedontheleft-handradiatorsupport.Recordthe information on the sample identification plate provided below. 9 Tractor Identification The information is stamped on the front support (1). These numbers are also repeated on the vehicle identification plate reproduced above. serial number and model identification 10 1--4

SECTION 1 - - GENERAL INFORMATION AND SAFETY Engine Identification The engine serial number and date code can be found on the engine identification plate. Theidentificationplateislocatedontopoftheengine attached to the valve cover. The plate also provides information on engine adjustments and compliance with Emission Regulations where required. Record the information below for quick reference. Engine Serial No. 11 Driveline Identification The serial number plate (1) is located on top of the transmission casing. Access to the number can be gained by removing the plate in the floor of the cab as shown in the illustration. This number is repeated on the vehicle identification plate. Record the information below for quick reference. Driveline Serial No. 12 ROPS Identification plate The ROPS identification plate can be found on the right--hand side of the cab trim panel, below the rear window. 13 1--5

Suggest: If the above button click is invalid. Please download this document first, and then click the above link to download the complete manual. Thank you so much for reading

SECTION 1 - - GENERAL INFORMATION AND SAFETY ECOLOGY AND THE ENVIRONMENT Soil, air and water are vital factors of agriculture and lifeingeneral.Wherelegislationdoesnotyetrulethe treatment of some of the substances which are required by advanced technology, common sense should govern the use and disposal of products of a chemical and petrochemical nature. 12. Modern oils contain additives. Do not burn contaminated fuels and/or waste oils in ordinary heating systems. 13. Avoid spillage when draining off used engine coolant mixtures, engine, gearbox and hydraulic oils, brake fluids, etc. Do not mix drained brake fluids or fuels with lubricants. Store them safely until they can be disposed of in a proper way to comply with local legislation and available resources. Thefollowingarerecommendationswhichmaybeof assistance: Become acquainted with and ensure that you understand the relative legislation applicable to your country. 14. Modern coolant mixtures, i.e. antifreeze and other additives, should be replaced every two years. They should not be allowed to get into the soil but should be collected and disposed of safely. Where no legislation exists, obtain information from suppliers of oils, filters, batteries, fuels, anti freeze, cleaning agents, etc., with regard to their effectonmanandnatureandhowtosafelystore, use and dispose of Agricultural consultants will, in many cases, be able to help you as well. 15. Do not open the air-conditioning system yourself. It contains gases which should not be released into the atmosphere. conditioning specialist has a special extractor for this purposeandwillhavetorechargethesystem anyway. these substances. Your dealer or air 16. Repairany leaks ordefects intheenginecooling or hydraulic system immediately. HELPFUL HINTS 10. Avoid filling tanks using unsuitable containers or inappropriate pressurised fuel delivery systems which may cause considerable spillage. 17. Do not increase the pressure in a pressurised circuit as this may lead to the components exploding. 11. In general, avoid skin contact with all fuels, oils, acids, solvents, etc. Most of them contain substances which can be harmful to your health. 18. Protect hoses during welding as penetrating weld splatter may burn a hole or weaken them, causing the loss of oils, coolant, etc. 1--6

https://www.ebooklibonline.com Hello dear friend! Thank you very much for reading. Enter the link into your browser. The full manual is available for immediate download. https://www.ebooklibonline.com