Case IH Farmall 70JX Farmall 75JX Farmall 80JX Farmall 90JX Farmall 100JX Farmall 110JX Tractors Operator’s Manual Instant Download (Publication No.84530272)

ORIGINAL INSTRUCTIONS- according to Directive 2006/42/EC, Annex I 1.7.4.1 Farmall 70JX Farmall 75JX Farmall 80JX Farmall 90JX Farmall 100JX Farmall 110JX Tractor OPERATOR S MANUAL Part number 84530272 1st edition English September 2012

SECTION SUMMARY 1 Introduction and safety measures 2 General information, controls and instruments 3 Field Operations 4 Lubrication and Maintenance 5 Troubleshooting 6 Vehicle storage 7 Accessories 8 Specifications and data 9 First 50 Hour Service Forms 10 Alphabetical index

Electro-magnetic Interference (EMC) This tractor complies with the European Regulations on electro-magnetic emissions. However, interference may arise as a result of add-on equipment which may not necessarily meet the required standards. As such interfer- ence can result in serious malfunction of the unit and/or create unsafe situations, you must observe the following: Ensure that each piece of non-Case IH equipment fitted to the tractor bears the CE mark. The maximum power of emission equipment (radio, telephones, etc.) must not exceed the limits imposed by the national authorities of the country where you use the tractor. The electro-magnetic field generated by the add-on system should not exceed 24 V/m at any time and at any location in the proximity of electronic components. Failure to comply with these rules will render the Case IH warranty null and void. I

https://www.ebooklibonline.com Hello dear friend! Thank you very much for reading. Enter the link into your browser. The full manual is available for immediate download. https://www.ebooklibonline.com

CE DECLARATION OF CONFORMITY DOCUMENT 1 On page III is provided copy of the EC Declaration of Conformity (EC Declaration of Conformity acc to 2006/42/EC). The EC Declaration of Conformity is the manufacturer s declaration about equipment compliance to relevant EU provisions. Please keep the original document in a safe place. Local authorities may require you to show this document in order to assure compliance of your equipment. Translation of this declaration in your own country language is provided on the original document II

For your better and easier understanding of the document you will find original text reproduced hereafter together with some notes Clause of EN EC Declaration of Conformity According to Directives 2006/42/EC 2006/42/EC Annex II We, [1] 1.A.1 Represented by Giuseppe Gavioli, CNH Europe Holding S.A. 24, Boulevard Royal L 2449 Luxembourg declare under our sole responsibility, that the product: 1.A.2 1.A.3 Agricultural tractor Trade Name: [2] Model: [3] Type: [4] Serial Number: [5] to which this declaration relates, fulfills all the relevant provisions of Directives 2006/42/EC amended by: [6] For the relevant implementation of the provisions of the Directives, the following (harmonised) standards have been applied: ISO 26322 1 part 1 or 2 1.A.4 1.A.7 Other standards: see Operator s Manual Place and date of the declaration: [7] 1.A.9 Name and signature of the authorised person: [8] 1.A.10 HEALTH AND SAFETY RELATED STANDARDS APPLIED TO YOUR TRACTOR The cab FOPS (Falling Object Protection System) is not certified according to OECD Code 10. HVAC (Heating, Ventilation Air Conditioning ) CAB is certified Category 2 according to EN 15695 1 III

CONTENTS Title Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II CE DECLARATION OF CONFORMITY DOCUMENT . . . . . . . . . . . . . . . . . . . III HEALTH AND SAFETY RELATED STANDARDS APPLIED TO YOUR TRACTOR Section 1 Introduction and safety measures To the owner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tractor identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ecology and the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety messages used in this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Working safely . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety covers and guards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . International symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 1 3 1 6 1 7 1 16 1 35 1 39 1 42 Section 2 General information, controls and instruments Controls and instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Instrument panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Instrument console controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Right hand side operating controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Left hand side operating controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cab controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cab air conditioning system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Transmission with range gear (12+4) 30 km/h (19 mph) Transmission with range gear and shuttle 30 km/h (19 mph) Transmission with range gear and power shuttle 30 km/h (19 mph) Transmission with creeper and shuttle 30 km/h (19 mph) Mechanically controlled four wheel drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanically controlled differential lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Towing the tractor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Loading the tractor onto a transporter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Checks before using the tractor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 2 3 2 9 2 10 2 11 2 14 2 15 2 18 2 26 2 30 2 32 2 35 2 39 2 42 2 44 2 48 2 48 2 50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 3 Field Operations Starting with thermostart the engine Power take off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Three point linkage Cat. II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Remote control valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wheel track adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tyres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tyre combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ballasting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Static weight distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3 3 5 3 24 3 29 3 37 3 39 3 46 3 50 3 53 3 50 IV

Section 4 Lubrication and Maintenance Access for inspection and maintenance Lubrication and maintenance table Flexible maintenance When the warning light is on 10 hour / daily service 50 hour service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 hour service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 hour service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 hour service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 hour or every 2 years service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electrical system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Recommendations for bodywork maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lubricant capacities and specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 5 Troubleshooting Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electrical system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Three-point linkage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 5 4 5 4 8 4 10 4 15 4 20 4 24 4 31 4 33 4 34 4 40 4 42 4 50 4 51 5 1 5 2 5 5 5 6 5 7 5 8 5 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1 Section 6 Vehicle Storage Section 7 Accessories Beacon lamp Drawbars and towing attachments Hydralic trailer brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2 7 3 7 8 Section 8 Specifications and Data General Dimensions Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Engine specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fuel system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cooling system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power take off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Three-point linkage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Front axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4WD front axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bodywork and driving position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Towing devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electrical system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2 8 4 8 5 8 6 8 6 8 7 8 7 8 7 8 8 8 8 8 9 8 9 8 10 8 10 8 11 8 11 8 11 8 12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1 Section 9 First 50 hour Service Forms Section 10 Alphabetical Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 1 V

METRIC AND IMPERIAL UNITS ABBREVIATIONS RECOMMENDED SI (METRIC) UNITS IMPERIAL UNIT TYPICAL TYPICAL APPLICATIONS NAME SYMBOL NAME SYMBOL AREA Land area hectare square meter ha m2 acre square foot square inch square inch ha ft2 in2 in2 mm2 square millimetre ELECTRICITY ampere volt microfarad ohm A V F ampere volt microfarad ohm A V F FORCE kilonewton newton kN N pound pound Ib Ib FORCE PER LENGTH newton per metre N/m pound per inch Ib/in FREQUENCY megahertz kilohertz hertz MHz kHz Hz Megahertz kilohertz hertz MHz kHz Hz FREQUENCY ROTATIONAL r/min (a) rpm revolution per minute r/min rpm revolution per minute LENGTH kilometre meter centimetre millimeter micrometer km m cm mm m mile foot inch inch mi ft in in MASS kilogram gram milligram kg g mg pound ounce Ib oz VI

RECOMMENDED SI (METRIC) UNITS IMPERIAL UNIT TYPICAL TYPICAL APPLICATIONS NAME SYMBOL NAME SYMBOL POWER kilowatt watt kW W horsepower Btu per hour Btu per minute HP Btu/hr Btu/min PRESSURE or STRESS (FORCE PER AREA) kilopascal kPa pound per square inch inch of mercury inch of water pound per square inch PSI inHg inH2O PSI pascal megapascal Pa MPa TEMPERATURE (other than THERMODYNAMIC) C F degrees Celsius degrees Fahrenheit TIME hour minute second h min s hour minute second h min s TORQUE (includes BENDING MOMENT, MOMENT OF FORCE, and MOMENT OF A COUPLE) Newton meter Nm Nm pound foot pound inch Ib ft Ib in VELOCITY kilometre per hour km/h kph m/s mm/s m/min mile per hour mph meter per second millimetre per second meter per minute foot per second inch per second foot per minute ft/s in/s ft/min VOLUME (includes CAPACITY) m3 yd3 cu yd in3 US gal UK gal US qt UK qt fl oz cubic meter cubic yard litre litre l l cubic inch US gallon UK gallon US quart UK quart fluid ounce millilitre ml VII

RECOMMENDED SI (METRIC) UNITS IMPERIAL UNIT TYPICAL TYPICAL APPLICATIONS NAME SYMBOL NAME SYMBOL VOLUME PER TIME (includes DISCHARGE and FLOW RATE) m3/min l/min ft3/min US gal/min UK gal/min cubic meter per minute litre per minute cubic foot per minute US gallon per minute millilitre per minute ml/min UK gallon per minute SOUND POWER LEVEL and SOUND PRESSURE LEVEL decibel dB decibel dB VIII

SECTION 1 INTRODUCTION AND SAFETY MEASURES TO THE OWNER SAFETY GENERAL Pages 1 7 to 1 22 inclusive list the precautions to be observed to ensure your safety and the safety of others. Read the safety precautions and follow the advice offered before operating the tractor. This Manual has been prepared to assist you in the correct procedure for running in, driving and operating and for the maintenance of your new tractor. Read this Manual carefully. Your tractor is intended for use in normal and customary agricultural applications. FIRST 50 HOUR SERVICE In Section 9, at the back of this Manual, you will find the 50 hour service reports. If at any time you require advice concerning your tractor, do not hesitate to contact your CASE IH dealer. He has factory trained personnel, genuine manufacturers parts and the necessary equipment to carry out all your service requirements. After you have operated the tractor for 50 hours, take your tractor, together with this Manual, to your dealer. He will then perform the factory recommended 50 hour service and complete the service report sheets (pages 9 1 and 9 3). The first sheet (page 9 1) is the dealer s copy and should be removed by the dealer after the service has been carried out. The second sheet (page 9 3) is your copy of the service performed. Ensure that you and the dealer sign both copies. Your tractor has been designed and built to give maximum performance, economy and ease of operation under a wide variety of operating conditions. Prior to delivery, the tractor was carefully inspected, both at the factory and by your dealer to ensure that it reaches you in optimum condition. To maintain this condition and ensure trouble free operation, it is important that the routine services, as specified in Section 4 of this Manual, are carried out at the recommended intervals. SERVICE PARTS It should be pointed out that genuine parts have been examined and approved by the Company. The installation and/or use of non-genuine products could have negative effects upon the design characteristics of your tractor and thereby affect it s safety. The Company is not liable for any damage caused by the use of non genuine parts and accessories. Only genuine replacement parts should be used. The use of non-genuine parts may invalidate legal approvals associated with this product. CLEANING THE TRACTOR Your tractor is a state-of-the-art machine with user friendly controls. This should be borne in mind when cleaning the tractor, particularly if using a high pressure washer. Even though every precaution has been taken to safeguard electrical components and connections, the pressure generated by some of these machines is such that complete protection against water ingress cannot be guaranteed. It is prohibited to carry out any modifications to the tractor unless specifically authorised, in writing, by the After Sales Service department of the Company. WARRANTY When using a high pressure washer, do not stand too close to the tractor and avoid directing the jet at electronic components, electrical connections, breathers, seals, filler caps, etc. Never direct a cold water jet at a hot engine or exhaust. Your tractor is warranted according to legal rights in your country and the contractual agreement with the selling dealer. No warranty shall, however, apply if the tractor has not been used, adjusted and maintained according to the instructions given in the Operator s Manual. 1 1

SECTION 1 INTRODUCTION AND SAFETY MEASURES ABOUT THIS MANUAL This Manual gives information for use of this tractor, as intended and under the conditions foreseen by the manufacturer during normal operation and routine service and maintenance. Normal operation means the use of the tractor for the purpose intended by the manufacturer by an operator familiar with the tractor and the mounted or towed equipment and complying with the information for operation and safe practices, as specified by the manufacturer in this Manual and by the signs on the tractor and the equipment. Normal operation includes the preparation and storage of the tractor, swinging components into work position and vice versa, adding or removing ballast and picking up and setting off attachments. Normal operation includes the adjustment and setting of the tractor and equipment, for the specific condition of the field and/or the crop Routine service and maintenance means activities that must be done daily by an operator familiar with the tractor characteristics and complying with the information for routine service and safe practices, as specified by the manufacturer in this Manual and by signs on the tractor, in order to maintain its proper function. Routine service includes activities such as fueling, cleaning, washing, topping up fluid levels, greasing, replacing of consumable articles such as lamp bulbs This Manual is not giving all the information related to periodical service, converting and repairs to be carried out by professional service personnel. For some of the latter activities, there may be a need for appropriate facilities, technical skills and tools which are not supplied with the tractor, please refer to your dealer or authorised workshop Periodical service means activities that must be done at defined intervals by trained personnel familiar with the tractor characteristics and which are complying with the information for periodical service and safe practices, as partly specified by the manufacturer in this Manual and in other Company literature, in order to maintain the expected life time of the tractor Converting means activities that must be done by professional service personnel familiar with the tractor characteristics and complying with the information for converting, as partly specified by the manufacturer in this Manual, in assembly instructions or in other Company literature, in order to fit the tractor to a specific configuration Repair means activities that must be done by professional service personnel only familiar with the tractor characteristics and complying with the information for repair, as specified by the manufacturer in the dealer s workshop Manual, in order to restore the proper function of the tractor after a failure or degradation of performance 1 2

SECTION 1 INTRODUCTION AND SAFETY MEASURES TRACTOR IDENTIFICATION PLATES Serial numbers identify the tractor and its main components. The identification data must be supplied by the dealer for requests for spare parts or service operations. Identification data is of fundamental importance in the event of theft of the tractor. The location of the various identification data is shown below. Frame identification data plate. Product Identification Number Plate Cab identification data plate Tractor frame number identification data plate (stamped on the axle support ) 1 3

SECTION 1 INTRODUCTION AND SAFETY MEASURES Product Identification Number Plate The Product Identification Number plate provides im- portant information on tractor and towed equipment weight combinations. This plate can be found on the right hand side of the cab exterior trim panel, below the rear window. The figures shown are the maximum permissible ve- hicle and towing weights and should not be exceed- ed, to do so may affect the safe operation of the trac- tor. See Drawbars and Towing Attachments in Section 7. 2 Product Identification Number Plate (inside the cab). 1 4

SECTION 1 INTRODUCTION AND SAFETY MEASURES Tractor frame number identification data plate (stamped on the axle support) Engine identification data plate (stamped on engine body). 1 5

SECTION 1 INTRODUCTION AND SAFETY MEASURES ECOLOGY AND THE ENVIRONMENT Soil, air and water are vital factors of agriculture and life in general. Where legislation does not yet rule the treatment of some of the substances which are required by advanced technology, common sense should govern the use and disposal of products of a chemical and petrochemical nature. 4. Avoid spillage when transferring used engine cooling liquids, engine and transmission lubricants, hydraulic oils, brake fluids, etc. Never mix used brake oil with fuel oil, or fuel oil with lubricants. Store safely until suitable disposal can be arranged according to national legislation or local regulations. 5. Modern anti freeze liquids and solutions, e.g. anti freeze and other additives,must be replaced every two years. They must not be left to be absorbed into the ground, but must be collected and disposed of in a suitable manner. The following are recommendations which may be of assistance: Become acquainted with and ensure that you understand the relative legislation applicable to your country. 6. Do not open the air-conditioning system yourself. It contains gases which should not be released into the atmosphere. Your dealer or air conditioning specialist has a special extractor for this purpose and will have to recharge the system anyway. Ask your suppliers of lubricants, oils, fuels, anti freeze, detergents, etc. for information on the effects of these products on humans and the environment and for instructions concerning their use, storage and disposal. In many cases, local agricultural consultants will be able to provide assistance. 7. Repair any leaks or defects in the engine cooling or hydraulic system immediately. 8. Do not increase the pressure in a pressurised circuit as this may lead to the components exploding. HELPFUL HINTS 1. Avoid filling tanks using unsuitable containers or inappropriate pressurised fuel delivery systems which may cause considerable spillage. 9. Protect hoses during welding as penetrating weld splatter may burn a hole or weaken them, causing the loss of oils, coolant, etc. 2. In general, avoid skin contact with all fuels, oils, acids, solvents, etc. Most of them contain substances which can be harmful to your health. 10. Do not adjust the setting of the fuel delivery system as this will alter the emission of exhaust fumes. 3. Modern oils contain additives. Do not burn contaminated fuels and/or waste oils in ordinary heating systems. NOTE: The engines installed on the tractors comply with anti pollution legislation. 1 6

Suggest: If the above button click is invalid. Please download this document first, and then click the above link to download the complete manual. Thank you so much for reading

SECTION 1 INTRODUCTION AND SAFETY MEASURES SAFETY MESSAGES USED IN THIS MANUAL This warning symbol points out important messages concerning your safety. IMPORTANT WARNINGS The machine is designed and produced exclusively for agricultural use. All other use will be considered to be contrary to the use specified by CASE IH, who cannot be held liable for damage to property or the machine, or for personal injuries which may result. Read the following safety regulations carefully and follow the recommendations in order to avoid potential hazards and safeguard your health and safety. In this manual the symbol is accompanied by the following keywords: Persons who risk improper use will therefore assume the responsibility for any consequences arising from such use. DANGER Indicates an immediate hazardous sitaution, that, if not avoided, will result in death or serious injury. Compliance maintenance and repairs described in this manual, are the essential preconditions for the use specified by CASE IH. with the instructions for use, WARNING The machine must only be used, serviced or repaired by personnel trained in the relevant working methods and safety regulations and who have been authorised to work on the machine. Indicates a potential hazardous situation that, if not avoided, could result in serious injury. CAUTION The user must also observe the rules concerning general safety and accident prevention, including the Highway Code when driving on public highways. Indicates a potentila hazardous situation that, if not avoided, may result in minor injury or mavhine damage.This can also be used to alert against unsafe practices. Any arbitrary modifications made to this machine will release CASE IH from any liability resulting from damage or injury. Failure to observe the instructions preceded by the aforementioned key words may result in severe or fatal injury to the persons involved. CASE IH and all its distribution organisations, inclusive of, but not restricted to, national, regional or local distributors, cannot be held liable for damage resulting from the malfunction of parts and/or components not approved by CASE IH. Furthermore, this manual also contains instructions preceded by the terms NOTE and IMPORTANT, with the following relevance in relation to machine protection: IMPORTANT: This is used to higlight important information for machine usage or specific procedures to prevent minor machine damages. Under no circumstances will a guarantee be issued for products made or sold by CASE IH that are damaged as a result of the malfunction of parts and/or components not approved by CASE IH. NOTE: This is used to identify and present supplementariy informations. 1 7

https://www.ebooklibonline.com Hello dear friend! Thank you very much for reading. Enter the link into your browser. The full manual is available for immediate download. https://www.ebooklibonline.com