Case IH Farmall 45A Farmall 50A Tractor Operator’s Manual Instant Download (Publication No.47982704)

FARMALL 45A FARMALL 50A Tractor OPERATOR S MANUAL Part Number 47982704 1st edition English June 2016

Contents 1 GENERAL INFORMATION Note to the owner........................................................................... 1-1 Product identification ....................................................................... 1-3 Product identification plate ................................................................. 1-4 International symbols....................................................................... 1-6 Noise level.................................................................................. 1-7 Vibration level information sheet ........................................................... 1-7 Machine stability............................................................................ 1-8 Personal safety............................................................................ 1-12 Before operating the tractor ............................................................... 1-13 2 SAFETY INFORMATION Safety precautions.......................................................................... 2-1 Before driving the tractor ................................................................... 2-1 Operating the tractor ....................................................................... 2-2 Operating the Power Take-Off (PTO)....................................................... 2-3 Servicing the tractor ........................................................................ 2-3 Prevention of fire or explosions............................................................. 2-4 Diesel fuel .................................................................................. 2-5 Fire extinguisher............................................................................ 2-5 Safety decals ............................................................................... 2-6 Protection offered by the tractor........................................................... 2-15 Intended use statement ................................................................... 2-16 3 CONTROLS AND INSTRUMENTS OPERATOR'S SEAT Operator seat adjustments ............................................................. 3-1 Seat belt ................................................................................ 3-2 FORWARD CONTROLS Switches and controls .................................................................. 3-3 Throttle control adjustment ............................................................. 3-3 Headlight switch control ................................................................ 3-4 Hazard warning light switch ............................................................ 3-5 Foot brakes............................................................................. 3-5 Foot accelerator ........................................................................ 3-6 Clutch pedal ............................................................................ 3-6 Shuttle lever ............................................................................ 3-6 LEFT-HAND SIDE CONTROLS Parking brake - adjustment............................................................. 3-7 Four-Wheel Drive(4WD) lever.......................................................... 3-7 Transmission range lever............................................................... 3-7 Power Take-Off (PTO).................................................................. 3-8

RIGHT-HAND SIDE CONTROLS Differential lock pedal................................................................... 3-8 Transmission main shift lever........................................................... 3-9 INSTRUMENT PANEL Indicator and warning lights ............................................................ 3-9 Gauges ................................................................................ 3-10 ROLL OVER PROTECTIVE STRUCTURE Roll Over Protective Structure (ROPS)................................................ 3-11 4 OPERATING INSTRUCTIONS COMMISSIONING THE UNIT Tractor refuelling........................................................................ 4-1 STARTING THE UNIT Boosting the battery .................................................................... 4-2 Starting the engine ..................................................................... 4-2 STOPPING THE UNIT Stopping the engine .................................................................... 4-6 5 TRANSPORT OPERATIONS PREPARING FOR ROAD TRANSPORT Carrying the tractor on a transporter ................................................... 5-1 RECOVERY TRANSPORT Towing the tractor....................................................................... 5-1 Frame localization overview............................................................ 5-2 6 WORKING OPERATIONS TRANSMISSION Transmission ....................................................................... 6-1 POWER TAKE OFF (PTO) PTO operation safety rules ......................................................... 6-2 Attaching Power-Take Off (PTO) driven equipment ............................... 6-3 Power Take-Off (PTO) operation ................................................... 6-3 REAR HITCH Hydraulic Power Lift (HPL) ......................................................... 6-5

https://www.ebooklibonline.com Hello dear friend! Thank you very much for reading. Enter the link into your browser. The full manual is available for immediate download. https://www.ebooklibonline.com

THREE POINT HITCH Three-point hitch ................................................................... 6-7 Lift rod adjustment.................................................................. 6-8 Top link adjustment................................................................. 6-9 Swinging drawbar ................................................................. 6-11 Flexible link end adjustment....................................................... 6-11 Telescopic stabilizers.............................................................. 6-12 REMOTE CONTROL VALVES Remote control valves - safety rules .............................................. 6-12 Rear remote control valve(s) ...................................................... 6-13 AUXILIARY POWER CONNECTIONS Trailer electrical socket ............................................................ 6-13 WHEEL TRACK ADJUSTMENT Front wheel track adjustment...................................................... 6-14 Front wheels-toe-in-adjust......................................................... 6-15 Wheel track adjustment ........................................................... 6-17 BALLASTING AND TIRES Ballast ............................................................................. 6-18 Iron weights (where fitted)......................................................... 6-19 Liquid ballast ...................................................................... 6-20 Tire inflation........................................................................ 6-20 Tire load and inflation charts ...................................................... 6-21 7 MAINTENANCE GENERAL INFORMATION Biodiesel fuel ........................................................................... 7-1 Introduction............................................................................. 7-2 Fuel requirement ....................................................................... 7-3 Guards.................................................................................. 7-4 Lubricants and coolants ................................................................ 7-5 Consumables........................................................................... 7-5 MAINTENANCE CHART Maintenance chart...................................................................... 7-6 EVERY 10 HOURS OR EACH DAY Check engine oil level ................................................................. 7-7 Radiator coolant level check ........................................................... 7-7 Steering reservoir oil level check ...................................................... 7-8 FIRST 50 HOURS Service operations...................................................................... 7-8

EVERY 50 HOURS Clutch adjustment ...................................................................... 7-9 Brake pedal adjustment ................................................................ 7-9 Wheel bolts and nuts - Check ......................................................... 7-10 Tire pressure .......................................................................... 7-10 Alternator belt.......................................................................... 7-10 Grease fittings ......................................................................... 7-11 Transmission, rear axle, and hydraulic system oil level - Check ...................... 7-14 Drain the fuel system water separator................................................. 7-14 EVERY 100 HOURS Change engine oil and filter ........................................................... 7-15 EVERY 150 HOURS Service the engine air cleaner......................................................... 7-16 Battery electrolyte level................................................................ 7-18 EVERY 200 HOURS Change the fuel filter .................................................................. 7-18 EVERY 300 HOURS Check the 4WD front axle differential oil level and the hubs oil level.................. 7-19 Power Take-Off (PTO) clutch lever .................................................... 7-20 Front wheel bearings .................................................................. 7-20 EVERY 600 HOURS Transmission breather - Cleaning ..................................................... 7-21 Hydraulic oil filter ...................................................................... 7-21 Change the engine air cleaner outer element ......................................... 7-22 Engine tappet valve clearance ........................................................ 7-23 Steering toe-in - Adjust ................................................................ 7-24 EVERY 1200 HOURS OR ANNUALLY Fuel injectors .......................................................................... 7-24 Change the transmission oil, the rear axle oil and the hydraulic oil ................... 7-24 Change the steering oil and filter...................................................... 7-25 Change the 4WD differential oil ....................................................... 7-26 Change the 4WD planetary hub oil.................................................... 7-26 EVERY 1200 HOURS OR TWO YEARS Change the engine coolant fluid....................................................... 7-27 Air cleaner inner element - Replace................................................... 7-28 GENERAL MAINTENANCE Bleeding the fuel injection system..................................................... 7-28

Engine idle speed ..................................................................... 7-30 Bulb replacement...................................................................... 7-31 Fuse replacement ..................................................................... 7-31 Protecting the electronic and electrical systems during battery charging or welding.. 7-32 Alternator .............................................................................. 7-33 STORAGE Tractor storage ........................................................................ 7-34 Preparation for use after storage...................................................... 7-34 8 TROUBLESHOOTING SYMPTOM(S) Engine .......................................................................... 8-1 Electrical system ............................................................... 8-2 Hydraulic system ............................................................... 8-3 Hydraulic lift .................................................................... 8-3 Brakes .......................................................................... 8-3 9 SPECIFICATIONS Speed charts ............................................................................... 9-1 Engine ...................................................................................... 9-1 Capacities .................................................................................. 9-2 Cooling system ............................................................................. 9-2 Electrical system ........................................................................... 9-2 Fuel system................................................................................. 9-3 Brakes ...................................................................................... 9-3 Steering..................................................................................... 9-3 Power Take-Off (PTO)...................................................................... 9-3 Hydraulic system ........................................................................... 9-4 Three-point hitch ........................................................................... 9-4 Clutch....................................................................................... 9-4 Tires ........................................................................................ 9-4 General dimensions ........................................................................ 9-5 Operating weights .......................................................................... 9-6

1 - GENERAL INFORMATION 1 - GENERAL INFORMATION###_1_### Note to the owner General eration and safe practices, as specified by the manu- facturer in this manual and by the decals on the tractor and the equipment This Manual has been prepared to assist you in the cor- rect procedure for running--in, driving and operating and for the maintenance of your new tractor. Your tractor, whichwasdesignedtopowerandpropelitself, isintended for use in normal and customary agricultural applications. Normal operation includes the preparation and storage of the tractor, swinging components into work position and vice versa, adding or removing ballast and picking up and setting off attachments. Read this Manual carefully and keep it in a convenient place for future references. If at any time you require ad- vice concerning your tractor, do not hesitate to contact your Authorized Dealer. He has company trained per- sonnel, genuine manufacturers parts and the necessary equipment to carry out all your service requirements. Normal operation includes the adjustment and setting of the tractor and equipment, for the specific condition of the field and/or the crop. Routine service Routine service and maintenance means activities that must be done daily by an operator familiar with the trac- tor characteristics and complying with the information for routine service and safe practices, as specified by the manufacturer in this manual and by decals on the tractor, in order to maintain its proper function. Rou- tineserviceincludesactivitiessuchasfueling, cleaning, washing, topping up fluid levels, greasing, replacing of consumable articles such as lamp bulbs. All data given in this manual is subject to production vari- ations. Dimensions and weight are approximate only and the illustrations do not necessarily show tractors in stan- dard condition. For exact information about any particular tractor, please consult your CASE IH dealer. Your tractor has been designed and built to give maxi- mum performance, economy and ease of operation under a wide variety of operating conditions. Prior to delivery, the tractor was carefully inspected, both at the factory and by your dealer to ensure that it reaches you in optimum condition. To maintain this condition and trouble-free op- eration, it is important that the routine services are carried out at the recommended intervals. Converting, periodical service and repair Periodical service means activities that must be done at defined intervals by trained personnel familiar with the tractor characteristics and which are complying with the information for periodical service and safe practices, as partly specified by the manufacturer in this manual and in other Company literature, in order to maintain the expected life time of the tractor. About this manual This manual gives information for use of your machine, as intended and under the conditions foreseen by the manu- facturer during normal operation and routine service and maintenance. Converting means activities that must be done by professional service personnel familiar with the tractor characteristics and complying with the information for converting, as party specified by the manufacturer in this manual, in assembly instructions or in other Com- pany literature, in order to fit the tractor to a specific configuration. Read and understand; keep it in good condition and al- ways safely store it in the provided pocket in the back of your seat for later easy retrieval. Repair means activities that must be done by profes- sional service personnel only familiar with the tractor characteristics and complying with the information for repair, as specified by the manufacturer in the dealer s workshop manual, in order to restore the proper func- tion of the tractor after a failure or degradation of per- formance. This manual does not contain all the information related to periodical service, converting and repairs to be carried out by professional service personnel. The Table of contents page (s) are provided to have an overview of main manual s topics. A detailed alphabetic index is available at the end of this manual for locating specific items. Cleaning the tractor Normal operation When cleaning the tractor, particularly if using a high pressure washing machine. precaution has to be taken to safeguard electrical / electronic components and connections. The pressure generated by some of these Normal operation means the use of the tractor for the purpose intended by the manufacturer by an opera- tor familiar with the tractor and the mounted or towed equipment and complying with the information for op- 1-1

1 - GENERAL INFORMATION machines is such that complete protection against water ingress cannot be guaranteed. and thereby affect it s safety. The Company is not liable for any damage caused by the use of non--genuine parts and accessories. While washing the tractor, using a high pressure wash- ing machine, do not stand too close to the tractor and avoid directing the jet at electrical connections, breathers, seals, filler caps, etc. Never direct a cold water jet at a hot engine or exhaust. Only genuine CASE IH replacement parts should be used. The use of non-genuine parts may invalidate legal approvals associated with this product. It is prohibited to carry out any modifications to the trac- tor unless specifically authorized, in writing, by the After Sales Service department of the Company. Safety Read the safety precautions and follow the advice offered before operating the tractor. Warranty Your tractor is warranted according to the current legis- lation in your country and with contractual agreements reached with the dealer at the time of sale. However, the warranty is no longer valid if the rules and instructions for the use and maintenance of the tractor described in this manual are not observed. Service parts It should be pointed out that genuine parts have been ex- amined and approved by the company. The installation and/or usage of non-genuine products could have nega- tive effects upon the design characteristics of your tractor 1-2

1 - GENERAL INFORMATION Product identification 1 BAILIND368AAB Tractor Identification Location (stamped) - (Front right side on frame) The tractor serial number, unit code and engine number are stamped on the top of the clutch housing. These num- bers are also repeated on the vehicle identification decal reproduced above. 2 BAIL11IND150AAB Engine Identification - The engine serial number stamped on right side of the engine cylinder block. This number is repeated on trac- tor identification decal and also stamped on clutch box. Record the engine Serial No. below for quick reference. Engine Serial No. ....................................... 3 BAIL11IND151AAB Transmission Identification The Serial No. is stamped on right side of transmission housing below driver seat. This information is repeated on tractor identification decal. Record the Transmission Serial No. below for quick reference. Transmission Serial No............................... 4 BAIL11IND152AAB 1-3

1 - GENERAL INFORMATION Front Axle Identification The plate (1) is located on the right hand side and gives the identification data for the axle fitted on the machine. Indicate below the corresponding serial number. Front Axle Serial No.......................................... 5 BAIL11IND153AAB Product identification plate Enter the machine classification the product identification number (P.I.N.) and serial numbers above the relevant lines below. When ordering components or requesting information, you may need to quote this numerical data to the Case dealer. Keep a written record of these identification numbers. Store these data records and the vehicle licensing documen- tation in a safe place. If the vehicle is ever stolen, notify the local police of these identification details. ABOUT THE RATING PLATE Arrangement of individual numbers 1 BAILIND369AAB 2 BAIL11IND155EAB 1-4

1 - GENERAL INFORMATION Arrangement of individual numbers 3 BAIL11IND155EAB Classification : Underside of hood Product identification number: ................................... 1-5

1 - GENERAL INFORMATION International symbols As a guide to the operation of the machine, various universal symbols have been utilized on the instruments, controls, switches, and fuse box. The symbols are shown below with an indication of their meaning. Thermostart starting aid Roof beacon PTO DraftControl Keep Alive Memory Transmission in neutral Alternator charge Accessory socket Turn signals Creeper gears Implement socket Fuel level Automatic Fuel shut-off Turn signals one trailer Slow or low setting %age slip Engine speed (rev/min x 100) Fast or high setting Turn signals two trailers Hitch raise (rear) Front windscreen wash/wipe Hitch lower (rear) Ground speed Hours recorded Hitch height limit (rear) Engine oil pressure Rear windscreen wash/wipe Differential lock Heater temperature control Hitch height limit (front) Engine coolant temperature Rear axle oil temperature Transmission oil pressure Hitch disabled Coolant level Heater fan Hydraulic and transmission filters Tractor lights 4WD engaged Air conditioner Headlight main beam Remote valve extend Warning! Air filter blocked Hazard warning lights Headlight dipped beam Remote valve retract Parking brake Work lights Variable control Brake fluid level Remote valve float Pressurized! Open carefully Malfunction! See Operator's Manual Stop lights Trailer brake Malfunction! (alternative symbol) Warning ! Corrosive substance Horn Position Control 1-6

1 - GENERAL INFORMATION Noise level In accordance with E.E.C. directives, the noise levels of tractors covered by this manual are as follows: Tractors with cab and fixed windscreen with air cleaner extraction system Noise level at operators ear Closed(1) Annex II* NA NA NA NA Drive by noise level Open(2) Annex II* 85.8 85.8 85.8 85.8 Model (transmission) Farmall 45 (2WD) Farmall 50 (2WD) Farmall 45 (4WD) Farmall 50 (4WD) Annex VI** 79 79 79 79 * Test results are in accordance with directive 2009/76/EEC Annex II. Maximum noise level at the operators ear with: 1) all cab windows and doors closed, tractor off load. 2) rear window and roof hatch open, tractor off load. ** Test results are in accordance with directive 2009/63/EEC Annex VI. Vibration level information sheet Hazards related to vibration exposure NOTE: More information about Whole Body Vibration (WBV) on agricultural tractors can be found on specific publications and related risks may be covered by local regulations; in order to correctly estimate statistics values based on your everyday activity on the tractor please use a specific measuring devise, such as a triaxial seat accelerometer. NOTE: The Whole Body Vibration level will depend on a lot of parameters, some of them machine related, others terrain related and many driver related. The properties of the track or field surface and the driving speed will be the predominant parameters. WARNING Machine vibration caused by improper ma- chine maintenance could injure an operator. Follow ALL of the precautions listed below. Failure to comply could result in death or se- rious injury. NOTE: Please visit www.cema-agri.org/WBV to get fur- ther documentation on Whole body vibrations risks. W0443A Machine vibrations cause discomfort to the operator and in some cases his health and safety may be at risk. Make sure the machine is in good condition and that the service interval work has been carried out correctly. Check the tire pressure, the steering and the brake sys- tem. Check that the operator s seat and adjustment controls are in good condition and then adjust the seat to suit the operator s size and weight. Operate all controls consistently so the machine works smoothly and modify your driving to suit working condi- tions. During travel, adjust your speed and slow down if neces- sary IncompliancewithEUstandard, 78/764/EECyoucanfind in the table below the vibration levels measured for seats used on your tractor model. Seat model / type Vibration* m/s2 at (testing mass) Light weight operator 8.90 Heavy weight operator 2.32 Harita A11600185A00 * Corrected weighted vibration acceleration 1-7

1 - GENERAL INFORMATION Machine stability The following procedure describes the requirements for machine stability, and how to calculate the required front mounted and rear mounted ballast. Roll-over hazard! ALWAYS be aware of the effect of inclines and steep hills on machine stability. handling, and braking performance may be af- fected. Adjust ballast and driving speed ac- cordingly to ensure stable and accurate steer- ing, and to ensure the required brake perfor- mance in critical situations. Failure to comply could result in death or se- rious injury. Operating, For the ballast refer also to the ballast recommendations in this manual. For the maximum permitted operating weights refer to the vehicle weights in this manual. The following procedure and calculation is based on the machine on even ground. W0444A Necessary data to evaluate stability (FAR- MALL 45 2WD / 4WD) WARNING Legend To get this Value Refer to : 1945--1995 (4WD) 1745--1775 (2WD) MT Mass of the unladen tractor = Tractor with standard equipment, minimum fuel, no weights or liquid ballast, no operator, and single wheel equipment Front axle load unladen tractor MF 840 (4WD) 625 (2WD 1120 (4WD & 2WD) 444 (4WD) 430 (2WD 1962 (4WD) 1977 (2WD) 918 (4WD) 919 (2WD) MR Rear axle load unladen tractor a Distance Centre of Gravity front load to front axle centre Wheelbase b c Distance rear axle centre to lower hitch point of three point linkage Distance Centre of Gravity rear load to lower hitch point of three point linkage d Manual of the equipment or measure 840.8 (4WD) Unladen 708.09 (2WD) Unladen 200 Kg e Distance rear axle centre to centre of gravity (COG) of MT (mass of unladen tractor) 1 BAIL11IND197BAB NOTE: 1 Equipment weight together with its filling must be added to laden values (seed drills, fertilizer spreaders, etc.) 2.Ballasting weight in the centre of the front or rear tires, either solid or liquid, must be added to MF, MR and MT. 3.In case of an unbalanced trailer, the value c is the dis- tance between the centre of the rear axle and the hitching point, the value d is 0, and BR is the vertical load of the trailer on the hitch. BF Massoffrontmountedequipment or front mounted ballast BR Mass of rear mounted equipment or rear mounted ballast Maximum permissible mass of the laden tractor Maximum permissible mass of the laden tractor Maximum permissible rear axle load BR NA MPT max MPF max MPR max 2250 (4WD) 2050 (2WD) 1040 (4WD) 825 (2WD) 1120 for Bosch 1-8

1 - GENERAL INFORMATION Constant parameters 0.2 Minimum ratio : actually axle load of laden front axle/mass of the unladen tractor 0.45 Minimum ratio : actually axle load of laden rear axle/mass of the unladen tractor 0.521 (4WD) 0.464 (2WD) 0.561 (4WD) 0.630 (2WD Required front ballast To Calculate BFr Ballast required at the front when carrying a load BR at the rear CALCULATION OF BFr MT*e = MF * b e = (MF * b) / MT BR* (c+d) - (MT * e) + (MPF * b) = BFr* (a+b) MPF > 0.2* MT MPF value must be higher than 0.2*MT BFr > [BR*(c+d) -- (MF*b) + (0.2*MT*b)] / (a+b) 2 BAIL11IND197BAB Required rear To Calculate BRr Ballast required at the rear when carrying a load BF at the front CALCULATION OF BRr MT*b (b-e) = MR * b BF*a - MT * (b--e) + (MPR*b) = BRr * (b+c+d) BR* (c+d) - (MT * e) + (MPF * b) = BFr* (a+b) MPR > 0.45* MT MPR value must be higher than 0.45*MT BRr > [BF*a) - (MR*b) + (0.45 * MT * b)] / (b+c+d) 1-9

1 - GENERAL INFORMATION Necessary data to evaluate stability (FAR- MALL 50 2WD / 4WD) Legend To get this Value Refer to : 2050 Max., 1980 Min. (4WD) 1820 Max., 1750 Min. (2WD) MT Mass of the unladen tractor = Tractor with standard equipment, minimum fuel, no weights or liquid ballast, no operator, and single wheel equipment Front axle load unladen tractor Rear axle load unladen tractor Distance Centre of Gravity front load to front axle centre Wheelbase MF 880 (4WD) 650 (2WD) 1130 (4WD & 2WD) 769 (4WD) 760 (2WD) 1962 (4WD) 1973 (2WD) 919 (2WD MR a b c Distance rear axle centre to lower hitch point of three point linkage Distance Centre of Gravity rear load to lower hitch point of three point linkage Distance rear axle centre to centre of gravity (COG) of MT (mass of unladen tractor) Mass of front mounted equipment or front mounted ballast Mass of rear mounted equipment or rear mounted ballast Maximum permissible mass of the laden tractor Maximum permissible mass of the laden tractor Maximum permissible rear axle load d Manual of the equipment or measure 859 (4WD) 724 (2WD) e 3 BAIL11IND197BAB NOTE: 1 Equipment weight together with its filling must be added to laden values (seed drills, fertilizer spreaders, etc.) 2.Ballasting weight in the centre of the front or rear tires, either solid or liquid, must be added to MF, MR and MT. 3.In case of an unbalanced trailer, the value c is the dis- tance between the centre of the rear axle and the hitching point, the value d is 0, and BR is the vertical load of the trailer on the hitch. BF 200 Kg BR NA MPT max MPF max MPR max 2270 (4WD) 2050 (2WD) 1080 (4WD) 850 (2WD) 130 1-10

1 - GENERAL INFORMATION Constant parameters 0.2 Minimum ratio : actually axle load of laden front axle/mass of the unladen tractor Minimum ratio : actually axle load of laden rear axle/mass of the unladen tractor 0.526 (4WD) 0.467 (2WD) 0.45 0.551 (4WD) 0.620 (2WD) Required front ballast To Calculate BFr Ballast required at the front when carrying a load BR at the rear CALCULATION OF BFr MT*e = MF * b e = (MF * b) / MT BR* (c+d) -- (MT * e) + (MPF * b) = BFr* (a+b) MPF > 0.2* MT MPF value must be higher than 0.2*MT BFr > [BR*(c+d) -- (MF*b) + (0.2*MT*b)] / (a+b) Required rear ballast To Calculate BRr 4 BAIL11IND197BAB Ballast required at the rear when carrying a load BF at the front CALCULATION OF BRr MT*b (b-e) = MR * b BF*a - MT * (b-e) + (MPR*b) = BRr * (b+c+d) BR* (c+d) - (MT * e) + (MPF * b) = BFr* (a+b) MPR > 0.45* MT MPR value must be higher than 0.45*MT BRr > [BF*a) - (MR*b) + (0.45 * MT * b)] / (b+c+d) 1-11

1 - GENERAL INFORMATION Axle load limits TO CALCULATE MPF < MPF max MPR < MPR max MPT < MPT max MPF MPR MPT CALCULATION OF MPF (MPF*B)-- BF*(A+B) - (MT*E) + BR*(C+D) MPF = [BF * (A+B) + (MF*B) - BR* (C+D)] / B < MPF MAX CALCULATION OF MPT MPT = BF + MT + BR < MPTMAX CALCULATION OF MPR MRT = MPT - MPF < MPR max 5 BAIL11IND197BAB Personal safety WARNING Equipment failure could cause accident or injury! Only use rigging equipment that has the capacity to lift the loads that you are moving. Always check the rigging equipment each day for damaged or missing parts. Make sure other workers or bystanders are not under the load while it is moving. Failure to comply could result in death or serious injury. W0205A WARNING Jack stands can slip or fall over. Dropping, tipping, or slipping of machine or its components is pos- sible. DO NOT work under a vehicle supported by jack stands only. Park machine on a level surface. Block wheels. Support machine with safety stands. Failure to comply could result in death or serious injury. W0069A 1-12

Suggest: If the above button click is invalid. Please download this document first, and then click the above link to download the complete manual. Thank you so much for reading

1 - GENERAL INFORMATION 1 DCAPLT5NE019S2E To lift the tractor use only the points shown in the figure. ALWAYS raise only the back or the front, NEVER both together. ALWAYS put chocks in front of or behind the wheels of the axle that is not to be lifted. Before operating the tractor Pre-operation checks WARNING Improper operation or service of this machine can result in an accident. Read and understand the SAFETY INFORMA- TION Section before you operate or service the machine. Failure to comply could result in death or se- rious injury. Do not operate the engine without a load. This can be as harmful to the engine as overloading. Ensure that the engine is subjected to heavy as well as light loads during the running--in period. Use the lower gears when pulling heavy loads and avoid continuous operation at constant engine speeds. Operat- ing the tractor in a low gear with light load and high engine speed will waste fuel. You will save fuel and minimise en- gine wear by selecting the correct gears for particular op- eration. W0266A Read this section carefully for a thorough understanding of operational requirements. Even if you operate other tractors, you should thoroughly read this section of the manual and ensure that you are familiar with the location and function of all the controls of this tractor. Check the instruments frequently and keep the radiator and various oil reservoirs filled to the recommended lev- els. Do not start the engine or attempt to drive or operate the tractor until you are fully accustomed with all controls. It is too late to learn once the tractor is moving. If in doubt about any aspect of operation of tractor, consult your Au- thorised Case IH Dealer. Perform daily lubrication and maintenance operation in accordance with 7-2 After completing the daily maintenance operations, perform a walk around visual inspection of the tractor. Pay particular attention and check the following items: Refer 7-6 for lubrication and maintenance requirements. Running-in procedure 1. Fan belt for cracks. 2. Engine area for accumulation of debris. Your tractor will provide long and dependable service if given proper care during the first 50-hours running-in pe- riod and if serviced at the recommended intervals. 3. Hoses, lines and fittings for leaks and damages. 4. Tires for damage. 5. Hardware for looseness. Avoid overloading the engine. Operating in a high gear under heavy load may cause engine overloading. Over- loadingoccurswhentheenginewillnotrespondtoathrot- tle increase 6. Leakage at joints. Make any necessary repairs before using the tractor 1-13

https://www.ebooklibonline.com Hello dear friend! Thank you very much for reading. Enter the link into your browser. The full manual is available for immediate download. https://www.ebooklibonline.com