802.11ax - PowerPoint PPT Presentation


Proposed Approach for MAC Address Assignment in IEEE 802.11

IEEE 802.1CQ is working on a mechanism to assign local MAC address blocks to end nodes specifically related to IEEE 802.11 standards. The current draft lacks a pre-association mechanism for IEEE 802.11 stations to obtain a local MAC address before association. The proposed remedy suggests specifying

6 views • 7 slides


Proposal for Random Access Efficiency Enhancement in IEEE 802.11be Networks

This document presents a proposal for enhancing random access efficiency in IEEE 802.11be networks through a Random-Access NFRP (RA-NFRP) principle. The proposal addresses the challenges of low efficiency in the current UORA procedure and introduces modifications based on the 802.11ax standard to im

5 views • 16 slides



Introduction to IEEE 802.11-20 EHT PPE Thresholds Field

IEEE 802.11-20 standard defines the Nominal Packet Padding values and Pre-FEC Padding Factors for PE fields in 11ax. The selection of Nominal Packet Padding values is crucial and can be determined using specific methods, including PPE Thresholds Present subfield. The PPE Thresholds field contains in

0 views • 14 slides


Use Case for Distributed Resource Units in Downlink Scenarios

The document explores the concept of distributed Resource Units (dRU) in downlink scenarios in IEEE 802.11 standards like 802.11ax and 802.11be. It discusses the benefits and potential advantages of using dRU in downlink transmissions, focusing on how it can effectively distribute tones across the s

3 views • 13 slides


Discussion on IEEE 802.11be MLD Architecture Alignment

IEEE 802.11 TGbe is exploring MLDs within the 802 architecture, focusing on aligning MLD operations with existing 802.11 features for enhanced compatibility. The MLD architecture aims to facilitate the flow of data between MAC SAPs and PHY SAPs, extending the current framework for APs and non-AP STA

1 views • 23 slides


Spectrum Mask Requirements in IEEE 802.11 for Punctured Transmission

The document discusses the spectrum mask requirements for punctured transmission in IEEE 802.11 standards, specifically focusing on differences between ETSI and IEEE 802.11ax spectral masks. It covers cases of puncturing scenarios and additional channel edge masks to be applied in different situatio

1 views • 16 slides


802.11ax Evaluation for IMT-2020 eMBB in Dense Urban Environments

The document presents a detailed analysis of the 802.11ax technology's performance in meeting IMT-2020 requirements for eMBB in dense urban settings. It includes results from simulations evaluating peak spectral efficiency, data rates, user experience, and mobility metrics. The study confirms 802.11

0 views • 14 slides


Evaluation of IEEE 802.11ax for IMT-2020 eMBB Dense Urban Test Environment

This document discusses the evaluation of IEEE 802.11ax technology in the context of the IMT-2020 Enhanced Mobile Broadband (eMBB) Dense Urban test environment. It analyzes the performance of 802.11ax in meeting the key PHY/MAC metrics required for eMBB Dense Urban scenarios, such as Peak Spectral E

2 views • 13 slides


IEEE 802.11-19-0202/r1 TGbd Agreed Terminology and Requirements

This document outlines the agreed terminology and requirements for the development of the next generation of IEEE 802.11p technology within IEEE 802.11bd Task Group. It covers aspects such as interoperability, co-existence, backward compatibility, and fairness between IEEE 802.11p and IEEE 802.11bd

0 views • 6 slides


Revisiting the IEEE 802.11-19/1340r2 Tone Plan Optimization

Revisiting the tone plan optimization for IEEE 802.11-19/1340r2, addressing issues with RUs near band edges, accommodating various STA bandwidth capabilities, and the inefficiencies of non-SST 11ax STAs in different BSS scenarios. Proposals include adapting to unknown future 11ax features, minimizin

5 views • 12 slides


Analyzing and Improving Latency in IEEE 802.11 Networks

The document discusses controlling latency in IEEE 802.11 networks to meet the demands of emerging applications that require not only high throughput but also low latency. It covers aspects such as latency analysis, potential improvements, latency vs. reliability trade-offs, and latency improvement

4 views • 14 slides


Considerations on PHY for 60 GHz in IEEE 802.11-22/1865r0 Document

The document discusses the possibility of standardizing multi-link (ML) with bands in the sub-7 GHz range combined with bands in the 45-72 GHz range, proposing reusing a sub-7 GHz PHY for mmWave bands. It explores the impact of phase noise on choosing the OFDM numerology for operation in the 45-72 G

1 views • 13 slides


Wireless TSN in 802.11: New Requirements and Integration with 802.1

This document discusses the extension of TSN capabilities from wired to wireless networks, focusing on potential enhancements for 802.11be and integration with Ethernet-based TSN standards. It covers topics such as time-sensitive applications, TSN toolbox overview, status of TSN capabilities support

4 views • 12 slides


Considerations on 6 GHz Discovery for IEEE 802.11-18/1922r0

IEEE 802.11-18/1922r0 document discusses the background and regulatory context for supporting 6 GHz operation in 802.11ax networks. It focuses on optimizing the discovery process for 6 GHz channels to enhance STA and network KPIs. The typical scanning/discovery procedure for non-AP STAs is outlined,

2 views • 14 slides


Modulation Schemes for IEEE 802.11bd Range Extension

The document discusses modulation schemes for extending the range in IEEE 802.11bd, aiming for at least 3dB lower sensitivity levels. It highlights the need for an implementation-friendly, proven technology already adopted in IEEE 802.11. The introduction of the MCS0 DCM scheme in 11ax is also cover

0 views • 15 slides


LDPC Investigation for IEEE 802.11bd Technology in March 2019

In March 2019, the document IEEE 802.11-19/0346r3 delves into the investigation of LDPC (Low-Density Parity-Check) codes for the advancement of 11bd technology. The authors from Marvell explore the potential benefits of LDPC over BCC (Block Code Concatenation) in achieving better sensitivity for 802

0 views • 15 slides


Evolution of Standards: IEEE 802.11 and 802.1D Relationship

Explore the relationship between IEEE 802.11 and 802.1D standards, discussing the necessity of referencing old standards, the state of 802.1D, and the potential for removing outdated references in 802.11. The submission proposes a migration model while emphasizing the importance of staying current w

0 views • 42 slides


Spatial Stream Allocation in IEEE 802.11-20 Trigger Frames

The document discusses spatial stream allocation in IEEE 802.11-20 trigger frames, specifically focusing on the SS Allocation subfield. It explains how trigger frames allocate resources for TB PPDU transmissions and solicit User Info fields, detailing the RU Allocation and SS Allocation subfields. T

3 views • 15 slides


Preliminary Results of IEEE 802.11-19/0728r1 11ax Evaluation on Mobility in Dense Urban eMBB Scenario

Presenting the initial outcomes of simulations on mobility in a Dense Urban enhanced Mobile Broadband (eMBB) scenario using IEEE 802.11-19/0728r1 standard. Results indicate compliance with ITU requirements for IMT-2020 RAT. Simulation parameters, configurations, assumptions, and analysis of mobility

1 views • 14 slides


Analytical Evaluation of IMT-2020 mMTC and URLLC Requirements in IEEE 802.11-19/0888r0

This contribution analyzes the IMT-2020 mMTC and URLLC requirements in IEEE 802.11-19/0888r0, evaluating the capabilities of 802.11ax technology in meeting these demands. It discusses key aspects such as connection density, message size, delay per user, evaluation scenarios, system configurations, S

0 views • 9 slides


Benchmarking of 802.11ax for eMBB Indoor Hotspot Using IMT-2020 Simulation Methodology

This presentation continues the benchmarking of 802.11ax capabilities concerning IMT-2020 requirements for eMBB Indoor Hotspot and Dense Urban test environments. The simulations cover UL, mobility aspects, and adherence to ITU-R methodology. Analytical evaluations and simulation results demonstrate

0 views • 16 slides


Enhancing BSS Load Management in 802.11ax Networks

Proposed changes to address load balancing issues in dense 802.11ax scenarios by introducing a new information element for BSS Load. The new element considers OFDMA utilization, UL/DL MU-MIMO, and allows for future extensions to ensure efficient AP selection by unassociated STAs. Enhancements aim to

0 views • 14 slides


IEEE 802.11-18-1269-00-00az Clock Synchronization Investigation

In July 2018, a document was presented by Feng Jiang et al. from Intel Corporation focusing on clock synchronization between ISTA and RSTA in IEEE 802.11-18-1269-00-00az standard. The document delves into the impact of sampling clock errors on range estimation, carrier frequency synchronization in 1

0 views • 10 slides


IEEE 802.11-19/1099r2 Preamble Structure Overview

The document discusses the specific preamble structures of IEEE standards such as 802.11n, 802.11ac, and the newer 802.11ax (11ax). It explores the functionalities provided by these preambles including synchronization, auto-detection, channel estimation, and more. The focus is on how different stand

0 views • 13 slides


Enhancements in Link Adaptation for IEEE 802.11 Standards

Discussions in the Jan. 2023 document focus on enhanced link adaptation considerations for IEEE 802.11 standards, particularly in 11be and 11ax. Various improvements and challenges in link adaptation are highlighted, emphasizing the need for enhanced link adaptation (ELA) to address issues like inte

0 views • 14 slides


Power Consumption and Latency in IEEE 802.11ax State Transitions

This document discusses power consumption and latency values in state transitions for IEEE 802.11ax simulation scenarios. It covers power states definition, common power model parameters, and state transitions within the simulation scenarios. The transitions include Transmit to Listen, Receive to Li

0 views • 9 slides


IEEE 802.11ax Sleep States Analysis

This document delves into the analysis of sleep states in IEEE 802.11ax, emphasizing the need for refining current sleep state definitions to adhere to network conditions. It proposes various sleep states modifications to accommodate densification and low power operations, aiming to strike a balance

0 views • 12 slides


Discussion on Power State Definitions in IEEE 802.11ax

This document discusses the power state definitions in IEEE 802.11ax, focusing on Deep Sleep and Shallow Sleep states. It addresses the current consumption values and proposes modifications to enhance the clarity of power state definitions and transitions. The author, Chittabrata Ghosh from Intel, p

0 views • 13 slides


IEEE 802.11-15/1306r0 Use Cases for LRLP and Full Function in STA

The documents related to IEEE 802.11-15/1306r0 explore various use cases for LRLP (Low-Rate Longevity-Performance) and full functional capabilities in Single Terminal Architecture (STA). Tim Godfrey from EPRI presents scenarios where AP/STA pairings with 802.11ax and LRLP are approved and deployed,

0 views • 7 slides


IEEE 802.11-15/0099 Payload Symbol Size for 11ax Study

The document dated January 2015 discusses the payload symbol size for 11ax in IEEE 802.11 standards. It includes contributions from various authors representing companies like Broadcom, Intel, Samsung, Marvell, and NTT. The study addresses technical aspects related to wireless communication technolo

0 views • 33 slides


IEEE 802.11-17/1338r0 - September 2017 TWT SP Initiation and Termination

This document, authored by Jarkko Kneckt from Apple, discusses the September 2017 TWT SP initiation and termination processes, focusing on high throughput and power efficiency for 802.11ax devices. Legacy power save mechanisms in parallel with TWT mechanisms are explored, along with issues related t

0 views • 15 slides


IEEE 802.1CQ: Address Assignment and Validation Protocols

This document explores the assignment and validation of unicast addresses within IEEE 802 networks, emphasizing the need for uniqueness to prevent operational errors and security breaches. It discusses the challenges of ensuring globally-unique addresses, proposing the implementation of a single val

0 views • 6 slides


IEEE 802 Wireless Meeting Venue Reports and Future Plenary Contracts Update

Jon Rosdahl from Qualcomm provided updates on the current status of 802 Wireless Interim Session venue plans, a recap of 802 Executive Committee decisions, and future 802 Plenary venue contract statuses up to 2027. The presentation highlighted selected venues, open dates, and upcoming contracts for

0 views • 56 slides


Performance Evaluation of Parameterized Spatial Reuse with Coordinated Beamforming for IEEE 802.11be

The study focuses on assessing the performance of parameterized spatial reuse (PSR) with coordinated beamforming/null steering for IEEE 802.11be. The framework allows coordinated sharing of uplink transmission opportunities among APs, demonstrating gains in synchronous coordinated beamforming system

0 views • 19 slides


Performance Evaluation of Coordinated Beamforming with Parameterized Spatial Reuse in IEEE 802.11be

The document discusses the performance evaluation of coordinated beamforming with parameterized spatial reuse (PSR) in IEEE 802.11be. It explores the practical operation of the 802.11ax PSR framework with null steering and the key implementation benefits, emphasizing unsynchronized operation and ada

0 views • 20 slides


Suitability of IEEE 802.11ah for LPWAN Applications Analysis

This document analyzes the suitability of IEEE 802.11ah for Low Power Wide Area Network (LPWAN) applications. It examines the features of IEEE 802.11ah, such as OFDM-based FEC and its performance in fulfilling LP-WAN use-cases. The document also discusses channel models, interference resistance, and

0 views • 22 slides


Implicit Sounding Scheme in IEEE 802.11-20/0065r3

Implicit sounding schemes are analyzed in IEEE 802.11-20/0065r3 to address overhead issues in utilizing 11ax sounding schemes for advanced features like 16ss and multi-AP setups. Various challenges such as calibration accuracy, UL/DL power differences, and inter-user interference are discussed, high

0 views • 19 slides


IEEE 802.11-15/0364: Channel Estimation Considerations in Wi-Fi Standards

Channel estimation in IEEE 802.11 standards, such as 11n, 11ac, and 11ax, is crucial for efficient MIMO systems. The noise impact during data reception affects the quality of the channel estimate, leading to SNR reduction post-equalizer. Techniques like channel smoothing and averaging of training se

0 views • 11 slides


Efficient UL Buffer Status Reporting in IEEE 802.11 Networks

IEEE 802.11-16/0856r1 discusses the importance of UL buffer status reporting in 11ax for efficient resource allocation. The document addresses managing unmanaged P2P flows to enhance buffer status reporting accuracy. It proposes solutions to prevent misallocation of resources due to large data amoun

0 views • 11 slides


Considerations on PHY Padding and Packet Extension in 11ax

The document discusses the proposed PHY padding and packet extension for IEEE 802.11ax, focusing on considerations for processing data within SIFS duration and relaxation of LDPC decoding processing time. It outlines the overview of the proposed padding scheme, considerations for LDPC implementation

0 views • 15 slides