Milk Products: Part 9 by Dr. Sushma Kumari
MILK PRODUCTS (PART -9)
BY-
DR. SUSHMA KUMARI
ASST.PROF., DEPT. OF LPT, BVC, PATNA
Khoa
•
Prepared by
partial dehydration of milk .
•
Milk fat > 20%
•
Total solid = 70-75%
•
Buffalo milk is preferred over cow milk because it gives
higher yield with good quality khoa with soft and smooth
body, granular texture.
•
Yield of khoa- ( 28 % moisture)
•
-Cow milk- 17-19 %
•
Boffalo milk- 21-23 %
KHOA
Khurchan
RABRI
Milk powder
•
Dried milk product.
•
Prepared by following methods-
•
1. Roller/ Drum dried method-
Milk is applied upon smooth surface of a
continuously rotating steam heated metal drum or roller .
The film of dried mil is continuously scraped off by a knife or
scraper located opposite to th point of application of milk.
The milk film is ground to obtain milk powder.
it is cheaper and has less solubility. Nearly 87 %.
ROLLER DRIED WHOLE MILK POWDER
•
2.
Spray dried method-
The basic principle of spray drying consist
in atomizing the milk. Concentrated milk is
sprayed into a large suitably designed drying
chamber, where they mix with a current of hot
air . The milk particles surrender their
moisture instantaneously and dry to a fine
powder, which is removed continuously.
costlier but solutibility more. Nearly
98%.
SPRAY DRYING OF WHOLE MILK POWDER
•
THANKS
In this informative presentation by Dr. Sushma Kumari, Assistant Professor at Dept. of LPT, BVC, Patna, various milk products such as Khoa, Rabri, and Milk Powder are discussed in detail. The process of preparing Khoa, the different methods of making Milk Powder, including Roller Dried Whole Milk Powder and Spray Dried Method, are elaborated upon. The preference of buffalo milk over cow milk for Khoa production and the differences in moisture content between the two types of milk are highlighted. Each product's characteristics, yield, and preparation techniques are presented, providing insight into the world of dairy products.
Download Presentation
Please find below an Image/Link to download the presentation.
The content on the website is provided AS IS for your information and personal use only. It may not be sold, licensed, or shared on other websites without obtaining consent from the author.If you encounter any issues during the download, it is possible that the publisher has removed the file from their server.
You are allowed to download the files provided on this website for personal or commercial use, subject to the condition that they are used lawfully. All files are the property of their respective owners.
The content on the website is provided AS IS for your information and personal use only. It may not be sold, licensed, or shared on other websites without obtaining consent from the author.
E N D
Presentation Transcript
MILK PRODUCTS (PART -9) BY- DR. SUSHMA KUMARI ASST.PROF., DEPT. OF LPT, BVC, PATNA
Khoa Prepared by partial dehydration of milk . Milk fat > 20% Total solid = 70-75% Buffalo milk is preferred over cow milk because it gives higher yield with good quality khoa with soft and smooth body, granular texture. Yield of khoa- ( 28 % moisture) -Cow milk- 17-19 % Boffalo milk- 21-23 %
Milk powder Dried milk product. Prepared by following methods- 1. Roller/ Drum dried method- Milk is applied upon smooth surface of a continuously rotating steam heated metal drum or roller . The film of dried mil is continuously scraped off by a knife or scraper located opposite to th point of application of milk. The milk film is ground to obtain milk powder. it is cheaper and has less solubility. Nearly 87 %.
2. Spray dried method- The basic principle of spray drying consist in atomizing the milk. Concentrated milk is sprayed into a large suitably designed drying chamber, where they mix with a current of hot air . The milk particles surrender their moisture instantaneously and dry to a fine powder, which is removed continuously. costlier but solutibility more. Nearly 98%.
