Engine Safe Coolants by SPS Automotive Components, Pune

Slide Note
Embed
Share

Engine Safe Coolants by SPS Automotive Components in Pune, Maharashtra, offer newly introduced synthetic coolants with a temperature range of -2°C to 106°C, ideal for tropical conditions. These coolants are approved by renowned radiator and OE manufacturers, including ARAI, and are available in green, red, and blue colors in various pack sizes. A comparative heat transfer test showed that Engine Safe Synthetic Coolant outperformed glycol-based coolant in maintaining lower temperature levels. Manufactured in Pune, these coolants provide efficient cooling solutions for automotive applications.


Uploaded on Sep 09, 2024 | 0 Views


Download Presentation

Please find below an Image/Link to download the presentation.

The content on the website is provided AS IS for your information and personal use only. It may not be sold, licensed, or shared on other websites without obtaining consent from the author. Download presentation by click this link. If you encounter any issues during the download, it is possible that the publisher has removed the file from their server.

E N D

Presentation Transcript


  1. Engine Safe Coolants SPS AUTOMOTIVE COMPONENTS,PUNE

  2. SPS AUTOMOTIVE COMPONENTS IS AN ISO 9001:2008 COMPANY SPS AUTOMOTIVE COMPONENTS,PUNE

  3. NEWLY INTRODUCED IN THE COUNTRY SYNTHETIC COOLANTS SPS AUTOMOTIVE COMPONENTS,PUNE

  4. Manufactured in ,Pune, Maharashtra. These are SYNTHETIC COOLANTS. These have temperature range ranging from Minus 2 C to 106 C Ideal for Tropical conditions. SPS AUTOMOTIVE COMPONENTS,PUNE

  5. The Coolants are approved by renowned Radiator Manufacturing Companies & OE Manufacturers along with ARAI. These Coolants are NOT INFLAMABLE. (Do not Catch Fire) These are available in Green, Red & Blue Colors. Pack Size of 1, 3, 4 , 5 , 25 & 210 Liters. SPS AUTOMOTIVE COMPONENTS,PUNE

  6. REPORT OF COMPARATIVE HEAT TRANSFER TEST CONDUCTED BETWEEN GLYCOL BASED COOLANT AND ENGINESAFE SYNTHETIC COOLANT PART I PART II COOLANT USED FOR THE TEST GLYCOL BASED COOLANT DILUTION 5 LIT CONCENTRATE + 5 TO 6 LIT WATER COOLANT USED FOR THE TEST ENGINESAFE SYNTHETIC COOLANT DILUTION - 5 LIT CONCENTRATE + 5 TO 6 LIT WATER WATER TEMPEARTURE AIR TEMPERATURE LOAD WATER TEMPEARTURE AIR TEMPERATURE LOAD AMBIENT RADIATOR RADIATOR RADIATOR RADIATOR TEMP INLET OUTLET FIRST READING INITIAL BEFORE STARTING THE GENSET 10.05 AM 31 40 TIME AMBIENT RADIATOR RADIATOR RADIATOR RADIATOR TEMP INLET OUTLET FIRST READING INITIAL BEFORE STARTING THE GENSET 01.40 PM 39 45 TIME INLET OUTLET INLET OUTLET 40 32 32 NORMAL 40 40 47 NORMAL 10.20 AM 10.35 AM 10.50 AM 11.05 AM 11.20 AM 11.35 AM 11.50 AM 12.05 PM 12.20 PM 12.35 PM 32 34 34 35 36 36 37 37 38 38 71 78 84 99 80 96 87 88 93 95 75 76 81 84 78 82 78 79 80 80 38 40 42 42 40 42 41 41 41 42 50 NORMAL NORMAL NORMAL NORMAL NORMAL NORMAL NORMAL NORMAL NORMAL NORMAL 01.55 PM 02.10 PM 02.25 PM 02.40 PM 02.55 PM 03.10 PM 03.25 PM 03.40 PM 03.55 PM 04.10 PM 04.25 PM 39 40 40 40 40 40 40 39 38 39 40 82 85 83 78 82 76 77 85 74 92 80 55 77 78 74 77 72 74 80 58 80 75 42 42 42 42 42 42 42 42 40 41 42 71 76 71 70 71 68 70 72 68 78 70 NORMAL NORMAL NORMAL NORMAL NORMAL NORMAL NORMAL NORMAL NORMAL NORMAL NORMAL 55 plus 55 plus 55 plus 55 plus 55 plus 70 73 73 74 ADDITIONAL LOAD - 7.5 HP COMPRESSOR WAS STARTED 04.40 PM 04.55 PM AVERAGE 39 40 39.5 85 84 82 80 74 42 46 78 72 ADDITION ADDITION AVERAGE 35.7 87.1 79.3 40.9 72 81.76 42.07 71.92 NOTE - 1) All Readings in Degree Centigrade 2) Radiator Outlet Temp Gauge used initially had max range of 50 Deg C, It was then replaced since readings were going out of range OBSERVATIONS 1) Glycol based Coolant was used at an average ambient temerature of 36 Deg C whereas Enginesafe Synthetic Coolant was used at an average ambient temperature of 39.5 Deg C 2) Average Radiator Inlet Temp for Glycol based Coolant was 87 Deg C and that for Enginesafe Coolant was 82 Deg C 3) Going by average both coolants maintained a differential of 8 Degrees between Radiator Inlet and Radiator Outlet 4) Average Radiator Inlet Temperature was achieved in almost 50-55 minutes by Glycol based Coolant 5) Average Radiator Inlet Temperature was ahcieved in 15 minutes by Enginesafe Synthetic Coolant 6) Enginesafe Synthetic Coolant produced 6 Deg LOWER Temp at Radiator inlet while opearting at 4 Deg Higher Ambient Temp 7) Results indicate Heat Transfer Capcity of Enginesafe Synthetic Coolant is much superior than Glycol based Coolant SPS AUTOMOTIVE COMPONENTS,PUNE

  7. TEST REPORTS TECHNICAL COMPARISON BETWEEN GLYCOL BASED AND COLDGUARD ACTIVE SYNTHETIC COOLANT Sr. No. Paramenter ETHYLENE GLYCOL BASED COOLANT Standard JIS/ASRTU Specifications COLDGUARD ACTIVE SYNTHETIC COOLANT 1 Boiling Point, Degree Celcius 10% Glycol 20% Glycol 30% Glycol 102 103 106 104 2 Foaming Property, 30% Aqueous Solution 4 max As per the specifications 3 pH , 30% Aqueous Solution 7 to 11 As per the specifications 4 Corrosion Property of Cast Aluminium at Heat Transfre Surface. 1:2 Aqueous Solution, 180-200 Kpa 135 +/- 2 Deg C, 168 +/- 2 Hrs (+/- 0.15) As per the specifications 5 Compatibility with Cooling System- Non Metal Natural Rubber EPDM Rubber Nitrile Rubber Chloroprene Rubber Silicon Rubber Poly Acrylic Rubber (+/- 5) (+/- 5) (+/- 5) (+/- 5) (+/- 5) (+/- 5) As per the specifications As per the specifications As per the specifications As per the specifications As per the specifications As per the specifications 6 Effect on Painted Finishes No discoloration, loss of gloss or swelling of film or other As per the specifications Corrosion Test in Glassware 20% Concentration, 336 +/- 2 Hrs at 88 +/-2 Deg C 7 7.1 Foaming during the Test No foam shall flood out of the collar As per the specifications 7.2 Appearance of the liquid phases No separation of phases or precipitation or gelling As per the specifications 7.3 Amount of precipitation, % Vol. Max 0.5 As per the specifications 8 Change in Mass of Metal Test Pieces, mg/ sq cm 8.1 Aluminium Casting Cast Iron Steel Brass Solder Copper (+/- 0.15) (+/- 0.15) (+/- 0.15) (+/- 0.15) (+/- 0.30) (+/- 0.15) As per the specifications As per the specifications As per the specifications As per the specifications As per the specifications As per the specifications SPS AUTOMOTIVE COMPONENTS,PUNE Page 1 of 2

  8. TERMS & CONDITIONS 1. LIST Less 45% Plus CST/ VAT as applicable. 2. SCHEME : 30 Cases Free for Every 100 Cases 3. Minimum Monthly Off take to be 2.4KL (200 Cases)per month per Distributor. 4. Payment Terms : 30 Days 5. Cash Discount : 2% CD before Taxes, if payment is made in 7 days from date of bill. 7. Goods will be Freight Paid. (The Distributor will have to pay the Freight and the same will be reimbursed with a Credit Note) SPS AUTOMOTIVE COMPONENTS,PUNE

  9. THANK YOU FOR YOUR VALUBLE TIME SPS AUTOMOTIVE COMPONENTS,PUNE

More Related Content