Band Saw Disassembly Process Steps
1
B
a
n
d
S
a
w
D
i
s
a
s
s
e
m
b
l
y
P
r
o
c
e
s
s
2
UNIT
3
remove 4
screws
Disassemble shroud cover
PROCESS
4
remove 4
screws
remove 2
screws
5
Take away
front half
Take away 2 rods and
then crash plate
6
remove 4 screws
Impact driver is
suggested to use.
Take away
rear half
7
Remove
covers
8
Meantime, you can disassemble front
half and rear half.
remove the screw
and take away the
front wheel
remove screws and
retain ring, you can get
the tension assembly
Front half
9
remove the screw and remove the rear wheel
A
2
0
V
i
m
p
a
c
t
d
r
i
v
e
r
i
s
n
e
e
d
e
d
t
o
r
e
m
o
v
e
t
h
i
s
s
c
r
e
w
.
remove 4 screws
Rear half
10
You can get
transmission
assembly
This guide provides step-by-step instructions with visual aids on disassembling a band saw. From removing screws to taking apart different components like shroud covers, wheels, and transmission assembly, this detailed process will help you efficiently dismantle your band saw for maintenance or repair.
Download Presentation
Please find below an Image/Link to download the presentation.
The content on the website is provided AS IS for your information and personal use only. It may not be sold, licensed, or shared on other websites without obtaining consent from the author.If you encounter any issues during the download, it is possible that the publisher has removed the file from their server.
You are allowed to download the files provided on this website for personal or commercial use, subject to the condition that they are used lawfully. All files are the property of their respective owners.
The content on the website is provided AS IS for your information and personal use only. It may not be sold, licensed, or shared on other websites without obtaining consent from the author.
E N D
Presentation Transcript
Band Saw Disassembly Process 1
UNIT 2
PROCESS Disassemble shroud cover remove 4 screws 3
remove 2 screws remove 4 screws 4
Take away 2 rods and then crash plate Take away front half 5
Take away rear half remove 4 screws Impact driver is suggested to use. 6
remove 1 screw and remove plastic tunnel Then get module and motor remove 11 screws Remove covers 7
Meantime, you can disassemble front half and rear half. Front half remove screws and retain ring, you can get the tension assembly remove the screw and take away the front wheel 8
Rear half remove 4 screws remove the screw and remove the rear wheel A 20V impact driver is needed to remove this screw. 9
You can get transmission assembly 10
