This document dated July 2023 discusses the definition and features of 4ab devices in the IEEE P802.15 Working Group for Wireless Personal Area Networks. It addresses safeguards for high throughput data use cases, interference mitigation techniques, coexistence improvement, device categories, enhanc

0 views • 16 slides

IEEE 802.1CQ is working on a mechanism to assign local MAC address blocks to end nodes specifically related to IEEE 802.11 standards. The current draft lacks a pre-association mechanism for IEEE 802.11 stations to obtain a local MAC address before association. The proposed remedy suggests specifying

6 views • 7 slides

WRC-2023 decisions impacting THz communications are outlined in this document submitted by Thomas Körner from TU Braunschweig. Changes in radio regulations, new allocations for Radio Location Services, and resolutions on passive and active service compatibility are highlighted, with potential new b

8 views • 10 slides

This document contains motions and action items presented by Clint Powell of HID Global during the November 2023 IEEE P802.15 Working Group meeting. It includes motions for approval and submission of projects to ISO/IEC JTC1/SC6 for information under the PSDO agreement. The motions were put forth, s

0 views • 21 slides

Discussion and resolution proposals for comments related to Listen Before Talk (LBT) in DraftC document submitted by Alex Krebs from Apple to the IEEE P802.15 Working Group. The document covers regulatory aspects, contributions, conclusions, and recommended steps for LBT implementation in wireless p

0 views • 18 slides

Considerations for resolving issues related to round hopping and block assignment within hyper blocks for the IEEE P802.15 Working Group. The document discusses safeguards, interference mitigation techniques, coexistence improvements, backward compatibility, improved link budget, additional channels

1 views • 9 slides

This document from December 2023 discusses medium synchronization recovery leveraging multi-AP coordination for multi-link devices. It covers features such as Multi-link device (MLD), Multi-link operation (MLO), and Ultra High Reliability (UHR) capability defined in P802.11bn for improvements in rat

0 views • 8 slides

This submission to the IEEE P802.15 Working Group focuses on the development of a sensing device for Wireless Personal Area Networks (WPANs). The document discusses the integration of Ultra-Wideband (UWB) technology for sensing applications, including presence detection and environment mapping. Key

0 views • 16 slides

Submission to IEEE P802.15 Working Group proposing safeguards to prevent disruption in high throughput data use cases along with interference mitigation techniques, coexistence improvements, enhanced ranging capabilities, and enhancements for accuracy, reliability, and interoperability in wireless p

3 views • 10 slides

This document presents a group discussion on the protocol for NBA-MMS-UWB sessions submitted to the IEEE P802.15 Working Group by Alexander Krebs from Apple. It covers objectives such as interference mitigation, improved link budget, and enhanced native discovery mechanisms for Wireless Personal Are

0 views • 8 slides

This tutorial focuses on IEEE standards for real-time Ethernet networks, enabling deterministic delivery time for applications in industrial automation and automotive control. Key topics include IEEE 802.1 Time Sensitive Networking and P802.3br Interspersing Express Traffic projects, aiming to meet

0 views • 61 slides

The November 2023 IEEE 802.11-23/2099r1 document showcases the awards and significant contributions for the P802.11bb Light Communications project. The presentation features accolades for the project officers, noteworthy contributions received, and a poetic nod to LiFi technology by referencing Shel

0 views • 10 slides

Document providing a report to the IEEE 802 Executive Committee requesting conditional approval to forward the P802.11ay draft to RevCom. The submission includes details on SA ballot results, voter comments, unsatisfied comments, and resolutions. Edward Au from Huawei Technologies authored the repor

0 views • 8 slides

The document captures the meeting agenda and proceedings of the IEEE P802.11-16/0513r5 gathering held in May 2016 in Waikoloa, Hawaii. It includes details such as session schedules, attendance records, approval of meeting minutes, and timelines for the workgroup's activities. Donald Eastlake from Hu

0 views • 25 slides

Overview of the withdrawal request for P802.15.12 PAR submitted by Pat Kinney of Kinney Consulting, including reasons such as lack of meetings, absence of TG chair, low attendance, and doubts about widespread adoption. The document details the upper layer interface provided by P802.15.12 and the add

0 views • 8 slides

This document submitted to the IEEE P802.15 Working Group discusses the importance of advanced channel coding for IEEE 802.15.4ab standard to achieve higher throughput and reliability. It outlines technical guidance on proposed solutions, safeguards, interference mitigation techniques, and backward

0 views • 14 slides

Kookmin University submitted a PHY sub-proposal for an ISC using a Compatible M-FSK (CM-FSK) scheme to the IEEE P802.15 Working Group for WPANs. The proposal aims to be compatible with rolling shutter image sensors by utilizing the CM-FSK modulation scheme. Design considerations include frame rate v

0 views • 31 slides

Submission for IEEE P802.15 Working Group presenting the SRDEV.PPDU for Enhanced Impulse Radio. The document outlines the two enhancement stages, Minimally Incremental Mode (MIM) and Performance Optimized Mode (POM), focusing on supporting specific frequency channels and enhancing performance throug

0 views • 16 slides

This contribution by Rick Roberts from Intel Corporation presents a proposed timeline with milestones for the IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs). The timeline covers activities from 2015 to 2018, including Call for Applications (CFA), Technical Requirements Docume

0 views • 6 slides

This document presents the report to the IEEE 802 Executive Committee requesting conditional approval to send P802.11bh to SA Ballot. It includes details on the completion of comment collections and multiple working group letter ballots. The results show the achievement of over 75% approval for Draf

0 views • 10 slides

This document presents the status summary of IEEE P802.11bb, covering the approval process and letter ballot results. The draft has undergone multiple WG letter ballots, with Draft 1.0 achieving a high approval rate. Changes in post-ballot votes did not yield new disapprove votes, and the group reso

0 views • 12 slides

Discussion on implementing MAC bridging for enhanced reliability in IEEE P802.15.6a networks, focusing on Time-Sensitive Networking (TSN) concepts for low latency and reliability in Body Area Networks (BAN). The document addresses the significance of TSN goals for BAN applications like vital signs m

0 views • 11 slides

This submission presents a modified transmit spectral mask for TG3e by Japan Radio Co., Ltd. The proposed mask aims to improve power efficiency without violating radio regulations. The motivation for the modification is to reduce unwanted aliasing and enhance SNR by employing a steep anti-aliasing s

0 views • 17 slides

This document delves into the intricacies of the Negotiation Phase of the 802.11az Protocol, focusing on developing specific parameters that require negotiation, reaching a consensus position, and creating corresponding Specification Framework Document content. Various negotiation options and the ro

0 views • 26 slides

Submission by Michael McLaughlin from Qorvo presents missing MMS options in the IEEE P802.15.4ab amendment for future-proofing, including benefits such as improved link margin, longer range, and lower power consumption. The proposal emphasizes technical advantages and recommends optional implementat

0 views • 4 slides

This document discusses the privacy address requirements for IEEE P802.15 Working Group's TG4ab standard for Wireless Personal Area Networks (WPANs). It covers the need for 48-bit addresses with collision resistance, the use of different privacy addresses for each frame, and the adequacy of 12-bit c

0 views • 8 slides

This document addresses enhancements in frequency stitching and CIR reports for the IEEE P802.15 Working Group, focusing on UWB technology. It discusses safeguards, interference mitigation, coexistence improvements, and proposed solutions to support high data throughput while avoiding disruption to

0 views • 11 slides

Submission document outlining motions presented by Pat Kinney of Kinney Consulting for the IEEE P802.15 Working Group at the EC closing meeting in March 2022. The document includes motions for approval to submit standards for balloting, such as P802.15.4-2020/Cor1, and PAR withdrawals like P802.15.1

0 views • 7 slides

Kookmin University submitted a proposal to the IEEE P802.15 Working Group for Wireless Personal Area Networks, focusing on the PHY and MAC layers for image sensor communication. The document outlines design principles, specifications, frame formats, and considerations for both layers. Definitions re

0 views • 41 slides

Submission report for the January 2014 session of the IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs). The report includes meeting goals, accomplishments, mailing list information, and details about the weekly call schedule.

0 views • 8 slides

The May 2023 document highlights the awards and acknowledgments for contributors to the IEEE P802.11bd project. It includes recognition for WG and TG officers, as well as appreciation for the dedication and patience of PHY and MAC resolution contributors. The presentation showcases the achievements

0 views • 8 slides